I-Thunderbird Support Forum

Short background: Critically low on disc space. Windows pointed out a potentially extraneous 8.5gb NS3TMP Thunderbird file. Extensive Googling convinced me it would be safe to delete this file. To be safe (HA!) I first copied it to an external drive just in case things went south. They did.

After the copy, I went back and deleted the NS3TMP file. However, much to my horror, instead of deleting 8.5gb as expected, 30.5gb got deleted. After that, Thunderbird would not start claiming my profile was missing.

I copied the 8.5gb backup file back to its original place. No joy. Same message from Thunderbird.

At this point, I recreated my profile pointing Thunderbird to my Outlook email account.

I could now sign into Thunderbird and T'bird started populating the inbox and sent folders, but only partially. Worse (MUCH worse) my critical Thunderbird local folders were nowhere to be found. I attempted several folder recovery procedures to no avail.

I confess, I do not know how Thunderbird works its magic behind the scenes. Were my local folders part of the surprise 30gb file deletion and thus gone for good? Would the original emails that had been dragged into the various folders still be sitting on Outlook's servers?

As I said, totally self-inflicted but hopeful there's a road to recovery.

Any assistance or consoling words would be much appreciated.

Hi!

I realised that Thunderbird keeps deleting my messages in every account from the trash folder. I didn't change any of the settings and I checked them again - as you can see in the screenshot, the settings say to not delete messages in the trash. It's a catastrophe, because I've lost messages that I had to check again.

-> Is there any way to restore messages that Thunderbird deleted without my permission? -> Is there any way to make sure that Thunderbird does not delete messages any more?

Thank you!

Version: 115.3.1 on a Mac

Hi, i have a PEC account configured on 2 different computers, when i forward a mail, near the message appears a blue mark, but in the other computer didn't appear, so my colleague cannot tell if i forwarded the mail or not, can you help me? this problem is only with PEC accounts, with normal mail works correctly, this problem came out some months ago, before worked also whit the PEC accounts

Hello,

I have been using Thunderbird for many years without any issues. I recently bought a laptop running Windows 11. On this machine, I have two accounts that cannot send emails via SMTP. What is puzzling is that I can retrieve emails through IMAP without any problems.

For another account I had to use STARTTLS to get it working. But on my Windows 10 machine, the same account is sending emails correctly with SSL/TLS.

Thunderbird is allowed through the Windows firewall and is on the antivirus whitelist.

I recently fixed an issue (connecting to Gmail) by allowing cookies, so it might be a simple fix like that.

Could someone help me, please?

Many thanks!

We have recently moved to a new mail server. We currently have about 20 Thunderbird email clients on Windows in an office location and a macOS home machine. On all machines email is configured to use IMAP on hostname.com port 993 SSL/TLS with Normal Password and SMTP on hostname.com port 465 SSL/TLS with Normal Password.

The home machine is working 100% with no issues, it does have a much faster and lower latency internet connection than the office machines.

Many of the office machines are experiencing intermitent SMTP error messages when sending, intermitent, "unable to save mail in the Sent folder of the Inbox", messages and intermitent unable to move messages between folders.

I have checked and double checked the settings on affected machines - however, I believe a settings issue would result in nothing working, not intermitent functionality. Plus all is working fine on the home machine with the same settings (different OS, but ports and security settings all dictated by server).

With one client behaving properly, the server likwise behaving properly when addressed by the working client and the intermitent nature of the problems we are finding, I suspect we have some sort of network issue. Somthing timing out or a firewall/AV software causing a delay.

I have increased mailnews.tcptimeout on affected machines to 250 based on a forum article but this has had no effect (No idea of units here but if it is seconde then I am not supprised - the SMTP errors, when they happen are almost instantanious).

Any ideas on how to trobleshoot this problem further - The problem seems to get worse through the day, although that may just be peoples tollerance of an intermitent issue going down.

Hello,

My friend recently encountered an issue where he can no longer send email messages. Suddenly, all the buttons in the "Message" tab, except for "Create," became disabled. Additionally, the "Send" related buttons in the message creation window have disappeared.

I attempted to restore these buttons using Alt -> Toolbox, as suggested by similar questions. While the buttons do reappear in the toolbox view, they vanish again once I exit that view. All outgoing servers are configured correctly, and this setup has worked for several years without any problems. It seems that something is now blocking the ability to send emails.

We also tried updating and reinstalling the Thunderbird client, but nothing has resolved the issue.

Attached, you will find images of the disabled menus and proof of the correctly configured outgoing servers. Apologies for the software being in Russian; I hope it's still clear which buttons are disabled since the interface layout is the same.

Any suggestions would be highly appreciated! Thank you.

When I restart Mozilla Thunderbird, my S/MIME certificate preferences under Account Settings seem to break.

When I initially select a certificate, both the common name/certificate name and the certificate fingerprint appear in the interface (see Working Settings.png). However, after restarting Thunderbird, only the common name/certificate name appears in the interface, and I cannot use S/MIME to sign messages (see Broken Settings.png). When I attempt to do so, I receive the following error message:

Send Message Error Sending of the message failed. You specified that this message should be digitally signed, but the application either failed to find the signing certificate specified in your Mail & Newsgroup Account Settings, or the certificate has expired.

To be clear, Thunderbird has no problem finding and using the certificate right after I set it—the problem only appears when I restart Thunderbird and the appearance of the certificate in the settings changes. The certificate does not expire until April 2025, so this is not the issue. The issue also occurs with another account using a different certificate that is also unexpired.

I am using Thunderbird 115.12.2 (64-bit ESR) on MacOS with Apple Silicon.

My e-mails fail to be delivered to my inbox immediately. They are held up somehow and then suddenly appear days later as a batch of them as though they have been held in a storage box.

I get the pop up that includes Add Security Exception

 You are about to override how Thunderbird identifies this site.

Legitimate banks, stores, and other public sites will not ask You to do this. Location:

This site attempts to identify itself with invalid Information. Unknown Identity The certificate is not trusted because it hasn’t been verified as issued by a trusted authority using a secure signature.

 Permanently store this exception

I am in Australia and Optus is my email provider. They have checked all is working at their end and suggest I contact Thunderbird which is why I am here.

Thanking you for trying to help

When I launched Thunderbird today, it would not connect to one mailserver: imap.mailfence.com. At the same time, Thunderbird said to restart to update to 115.2.2. After updating, it still refuses to connect. There is nothing wrong with Mailfence and I do not find anything wrong with the configuration settings in Thunderbird. I even tried to set up my Mailfence email account again but it failed because it could not connect. Ideas? Thank you.

"Sending of password for user joebernard@verizon.net did not succeed. Mail server pop.verizon.net responded: [SYS/TEMP] Server error - Please try again later"

^^This message comes up every time I try to send an email. It can be received outside of Thunderbird and to other addresses.

Dear

Subject to the following mail addresses: gunter.peeters@scarlet.be

We keep getting the following message when sending emails. An error occurred while sending email. The mail server replied: ip 213.49.30.104 blocked for relaying spam http://www.scarlet.be/pm/?e=f53&s=r&p=213.49.30.104. Please check if your email address is set correctly in your account settings and try again.

We are able to receive emails.

Is it possible to check this out?

Thanks in advance!

Kind regards Gunter Peeters

Translated with DeepL.com (free version)

Hi everyone, My Thunderbird yesterday - without doing any unusual chances that know of - went weird. Whenever I open the programme now it shows a completely different interface and I can't navigate back in any way to the usual calendar, email, contacts. It also seems to be frozen, because when I click settings it doesn't open any window. I have attached a screenshot of how it looks now.

Could anyone help me out on how to get back to regular Thunderbird? I am also a bit worried of losing all my contacts / calendar.

Let me know if there's more info I can give from my end. Any help very much appreciated.

I cannot send or receive messages on my Thunderbird a/c. I Believe I have to firstly update my email password from my supplier (Spark New Zealand) but to date I have been unable to do this. When I tried to do this on line Thunderbird indicated they did not recognize my email account at all. What should I do?

Thunderbird 115.12.1 (64-bit) on Linux Debian 12, I have several accounts in a panel on the left. When the accounts are collapsed, they unexpectedly expand and make it difficult to know which account's email I'm reading on the right.

How do I control that behavior, please?

I keep getting "can't connect" message and I have to enter my password for outgoing mail. Incoming comes through no problem. How can I get Thunderbird to remember my provider password for outgoing? They obviously already have it for incoming.

Regularly the messages in some subfolders are doubled. I don't know why or how it was triggered. It is very annoying, because some subfolders contain a lot of messages. Since I don't know how to get rid of this double messages, except by deleting them by hand one at the time, it is a very time consuming matter. I tried repairing the folder, but that didn't work. I already have had a folder where all messages were doubled several times. So every message was there six, seven, or eight times! Is there somebody with an explanation and - preferably - a solution to prevent this?

It seems as the interface thinks the window containing Thunderbird is longer than it actually is. The bottom part of the interface is missing and there's no scroll bar. This is most apparent to me in the Address book, where part of the fields is invisible, as are the Cancel/Save buttons. When I start Thunderbird, that bottom part of the interface would appear for about a second and then disappear. Resizing the window doesn't help.

When I start Thunderbird in Troubleshooting mode, the interface works fine, but "Reset toolbars and controls" and "Disable all add-ons" doesn't fixt the issue.

It might have started when I connected a secondary monitor, positioned above the primary. I thought disconnecting that monitor fixed it, but I since reconnected it and the issue now won't go away except when in Troubleshoot Mode.