Thunderbird Support Forum

See the previous, now archive post about it.

If this option makes emails sent from Thunderbird to any other email client have arbitrary line breaks where the line changes in the view of the composer. Please explain to me like I am 5, why is this ON by default? I just spent hours wording and formatting a work email vital for my career just to find out it will most likely look like a poem to the person that reeds it. This mailnews.wraplength "feature" looks a lot like is there to signal to other non-Thunderbird users to use Thunderbird. I really really hope there is a good explanation for why `mailnews.wraplength` exists and is on by default.

This there a "Global" Message Filter Rule where you can change an Apply Filter When: to ALL your Message Filters?

Example: I'd like to add "Periodically, every 10 minutes" to ALL my current Message Filters. Currently, it looks like I have to Edit each and every one of them?

Thank you in advance.

Using TBird 115.10.1 64-bit on Windows 11. For ease of reading text in mail I am composing, I would like to select a large font size. In Settings | Fonts I chose Arial 18; but for some reason I get a small monospaced font whenever I start a new message. I can enlarge it with Ctrl-Plus, but it reverts to its old ways for the next new message. How can I make the change stick?

My many message filters were lost in updating to 115, and it has taken much time to reconstruct the new layout to be usable. If this was AI generated, it is a poor outcome.

Hello,

I am new to Thunderbird and need help with configuring the 'Copies & Folders' tab in Thunderbird 115.12.2 (32 bit) running on Windows 10.

Background: I have just set up a pop3 account to download and locally store all incoming messages to my inbox and also to keep a copy of those messages on the server.

I want to store all sent messages for that pop3 account locally too, in a 'sent' folder.

Questions: 1. If I have more than one pop3 account set up like this, do I: (a) set up a separate 'sent' folder for each of those accounts; or (b) set up one 'sent' folder containing sent messages for all pop3 accounts, or (c) is it personal choice?

2. How do I set up: (a) a separate 'sent' folder for every pop3 account? (b) a single 'sent' folder for all pop3 accounts?

3. Can I keep a copy of all sent messages on the folder in addition to storing the locally; and if so how do I configure this?

4. How do I set up the Drafts & Templates section for the above scenario? My preference here would be to have one drafts folder for all pop3 accounts. I don't use templates.

5. If I uncheck the 'keep message archives in' check box, will that turn off automatic archiving and keep all incoming pop3 messages in the inbox?

6. Is there an up to date manual for Thunderbird? I can't find one.

Many thanks for your help with this.

Like all of us, I get bombarded with spam emails. So I set up filters to separate the "definitely spam" from "possibly spam". I've been doing this for many years now. But recently, maybe for the past few months, I'm finding that these blacklist filters aren't working anymore. The filtering failure seems to be getting worse as time goes on. And, yes, I do a match on "any", but that still doesn't work. As I said above, my filtering rules used to work just fine, but possibly a new Thunderbird update several months ago broke filtering?

Also, is there a way for filtering on the message content URL? I find that sometimes that's the only way to distinguish spam.

Trying to all threads to come up when I click on a new email as a default. Already did this:- settings>general - scroll down to config editor - enter mailnews.default_view_flags and change value to 0. Does not work!

I have a Thunderbird on my laptop with a big folder in the Local Folder. It has a labeled "mail window" having 5,044 messages in a folder named under the internals of the Profile as "Family" and "Family.msf". Under "Family" are at the next level called "Archive-A" and "Archive-A.msf". (This may not be a kosher "archive".) I tried to use NanaZip to prepare as a zip by Exporting it the other laptop's Thunderbird in our house, but the process seemed to hang before that could do it. Maybe there had to be two levels, I dunno. Maybe getting from a .ZIP to a .SBD....

Even if that had resulted in a useful .ZIP, I'm not at all clear how I could I succeed in importing it into the main profile on the other TB computer. I am defeated at this point.

I wish I had a "Thunderbird for Dummies", or at least a manual + a lexicon with acronyms.

Could someone help me out?

Thanks!

~Steve

I am considering moving to Thunderbird from MS Outlook. I want the rules I have already setup in Outlook to work in Thunderbird. Is this possible & if so how do I make it work.

Would you please help me permanently remove cache2 folder from Local Folders please. I'm using Thunderbird 115.12.2 (64bit) on esr channel with Windows 7 Ultimate Service Pack 1 OS.

I don't want Local Folders / Cache2 folder (or incidently Inbox, Drafts, Archives, Junk, Deleted and Outbox) but Thunderbird highlight - right click - delete button doesn't get rid of it. I can temporarily delete the Doomed and Entries sub-folders with right click - delete - delete folder but they move to Deleted folder where once again they can be deleted the same way but when restarting Thunderbird they are back under the cache2 folder again.

Even after exiting Thunderbird and directly deleting the cache2 folder(s) in system AppsData - Local and Roaming Thunderbird profiles the cache2 folder (with persistent sub-folders) returns to my Local Folders when restarted.

If ignored I eventually end up having a cache2-1 folder etc.

why is there no back button on thunderbird? I clicked on a message (have to click twice on it now in the lousy upgrade I was forced to use), and now I can't go back to the inbox. What's up????

I would like to know what the options below, contained in the settings editor, are for and how I can adjust them so that every message sent is configured to require confirmation of receipt by default:

mail.identity.default.request_receipt_header_type mail.identity.default.request_return_receipt_on mail.incorporate.return_receipt mail.receipt.request_header_type mail.receipt.request_return_receipt_on mail.request.return_receipt mail.server.default.incorporate_return_receipt

I have stayed on an old version of TB because of the old extensions that made it a much better product.

With the installation of Win 11 I decided to try the latest version of TB. I have to say I am not impressed. I forgot how much better TB was with the extensions.

My first question is how do I get to sort the order of items I see in TB? I want News & Feeds to be displayed above my email accounts. It would seem that this would be easy but I cannot find a way of doing it. What am I not understanding? Surely this should be simple? I want to choose the order of everything.

I also customised the interface with better scrollbars etc. None of the add-ons I used to use seem to work with the latest TB. At the moment the new install of TB is incredibily ugly. How do I change that?

I added a PNG picture as a background to my emails. Instead of a single background picture, it produces a collage (can't think of another word) of multiple copies of the same picture. Any way to just get a single picture?

Dear community

when I search for Quicktext Tutorials i see a nicely working application which allows me to manage text components and include them neatly in my writing. But what is actually showing after installation is a bit meager.

I can choose between "variables" and "other". ""Variables" is of no use at all, Other" simly allowes me to include a saved file in text or html from a folder. Well, thats a bit stoneage like, but I would have worked with that option, but:

Unfortunately, there is no way that Quicktext will save textsnippets as html or text. I definitely do not see myself copying parts of emails into notepad and saving them manually. That would be a very lame automation and definitely not quick enough ;). Also I am looking for the sort of "preview" Outlook is offering with Quick Parts.

Does anyone know anything about this problem or can recommend a better addon? I hate writing the same stuff again and again and again.

All the best, Maria

Hello, ive been using T'Bird as my business email client.

Whenever I hit send it requires me to type the password in. How can i get it to remember it? Ive been through the settings and there is no option to save.

Ive tried deleting my account and adding a new one but its no different.