Thunderbird Support Forum

I would like to change my account settings for my hotmail account, but when I try to change from Normal Password under Outgoing Server (SMTP) there is no option for Oauth. Is there something I can do to enable this option.

My Local Inbox suddenly started to arrange itself by group according to correspondent. I can't get the emails back into chronological order. I can't work with a mail program that doesn't give me my messages in chronological order, with most recent at the bottom. If I did something to cause this change, please tell me how to undo it. I have about eight email addresses, and they all feed mail into the Local Inbox.

I was getting warnings from my e-mail server that I was near the mailbox size limit, and Thunderbird displayed a percentage bar in the lower right corner. I've deleted a lot of large messages and want to see how far I am from the limit now, but now the bar isn't displayed. Is there a way to refresh this? Or is it a warning that's only pushed from the server?

(Unfortunately, my webmail site doesn't compute the size correctly and shows me at over 400%, so I can't see the actual size there until the server sends me another warning.)

A long-standing university email account that I accessed through Thunderbird was recently mistakenly deleted by the institutional administrator and all its contents deleted. The institution subsequently established a replacement email account for me, but the institutional Help Desk said the emails from the original account had been erased and could no longer be accessed from their server. Fortunately, I had Thunderbird configured to save all my emails on my local machine, so that even though I can no longer log in to the original email account, I can still view the emails in my Thunderbird installation (i.e., open and read them), even though every instance of starting up Thunderbird calls for me to supply the password for the original account (which I can no longer do). So I just close that dialogue box and can still see the emails stored locally on my machine.

I would like to move (or copy) these emails to a location where I can still access them off line and view them in the original organizational scheme (if possible), under the headings "subject," "correspondents," and "Date." But the Thunderbird "archive" feature seems to require that I be able to log on to the institutional server under the original account, which I can no longer do. The only existence of these emails is on my local computer.

Is there a way for me to preserve these emails as an accessible archive/repository so that I can continue having access to them, even though they are no longer in a functioning email account?

Thanks for any suggestions/help.

when clicking an email link this is shown

"Thunderbird is already running, but is not responding. To use Thunderbird, you must first close the existing Thunderbird process, restart your device, or use a different profile."

How do I make Thunderbird instead open a new email?

This is on Fedora

My Thunderbird Version: 115.12.2 (32 Bit)

Microsoft is changing the authentication method for outlook mail to OAuth2. I follow the guide here,

https://support.mozilla.org/en-US/kb/microsoft-oauth-authentication-and-thunderbird-202

And I get to this screen - but my version of the program does not have OAuth2 as an option (see attached image).

Thanks for the help.

When I launched Thunderbird today, it would not connect to one mailserver: imap.mailfence.com. At the same time, Thunderbird said to restart to update to 115.2.2. After updating, it still refuses to connect. There is nothing wrong with Mailfence and I do not find anything wrong with the configuration settings in Thunderbird. I even tried to set up my Mailfence email account again but it failed because it could not connect. Ideas? Thank you.

This there a "Global" Message Filter Rule where you can change an Apply Filter When: to ALL your Message Filters?

Example: I'd like to add "Periodically, every 10 minutes" to ALL my current Message Filters. Currently, it looks like I have to Edit each and every one of them?

Thank you in advance.

I am running version 115.12.2 (64-bit). I have deleted all stored passwords using Settings -> Privacy and Security -> Show Passwords. As expected, when I try to retrieve emails a pop-up appears asking for the password - which I save. However, when I try to send an email there is no pop-up and the remote server rejects the email. How do I set a new outgoing password?

I keep getting the attached error msg when trying to send an email. I've changed it to "Normal Password" as advised, but it's still the same. Any help would be appreciated. Regards norman

Thunderbird 115.12.0 inline image encoding does not work and neither Thunderbird nor any other email client can decode the images. I would not be concerned if the images were instead sent as attachments -- anything would be better than the situation right now. Here is what a the sent message looks like (truncated):

This is a multi-part message in MIME format.

Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit

Hi all,

I was able to do this using custom CSS:

And the CSS:

Result can be seen at https://u3aboxhill.com.au/wp/

Regards -- Manfred

Sent from a device that prioritizes functionality over brand

Content-Type: multipart/related;

boundary="------------tIS0qvzUR0f5GnY1te0NeTQ6"

Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: 7bit

<meta http-equiv="content-type" content="text/html; charset=UTF-8">

Hi all,

I was able to do this using custom CSS:

And the CSS:

Result can be seen at https://u3aboxhill.com.au/wp/

Content-Type: image/jpeg; name="Screenshot_2024-06-28_12-30-21.jpg" Content-Disposition: inline; filename="Screenshot_2024-06-28_12-30-21.jpg" Content-Id: <part1.Mgqyv4eh.JLQ644nh@c14.au> Content-Transfer-Encoding: base64

/9j/4AAQSkZJRgABAQEBLAEsAAD/4QCuRXhpZgAASUkqAAgAAAAHABIBAwABAAAAAQAAABoB BQABAAAAYgAAABsBBQABAAAAagAAACgBAwABAAAAAgAAADEBAgANAAAAcgAAADIBAgAUAAAA gAAAAGmHBAABAAAAlAAAAAAAAAAsAQAAAQAAACwBAAABAAAAR0lNUCAyLjEwLjM0AAAyMDI0 OjA2OjI4IDEyOjM2OjE0AAEAAaADAAEAAAABAAAAAAAAAP/hDM9odHRwOi8vbnMuYWRvYmUu Y29tL3hhcC8xLjAvADw/eHBhY2tldCBiZWdpbj0i77u/IiBpZD0iVzVNME1wQ2VoaUh6cmVT ek5UY3prYzlkIj8+IDx4OnhtcG1ldGEgeG1sbnM6eD0iYWRvYmU6bnM6bWV0YS8iIHg6eG1w dGs9IlhNUCBDb3JlIDQuNC4wLUV4aXYyIj4gPHJkZjpSREYgeG1sbnM6cmRmPSJodHRwOi8v d3d3LnczLm9yZy8xOTk5LzAyLzIyLXJkZi1zeW50YXgtbnMjIj4gPHJkZjpEZXNjcmlwdGlv biByZGY6YWJvdXQ9IiIgeG1sbnM6eG1wTU09Imh0dHA6Ly9ucy5hZG9iZS5jb20veGFwLzEu MC9tbS8iIHhtbG5zOnN0RXZ0PSJodHRwOi8vbnMuYWRvYmUuY29tL3hhcC8xLjAvc1R5cGUv UmVzb3VyY2VFdmVudCMiIHhtbG5zOmRjPSJodHRwOi8vcHVybC5vcmcvZGMvZWxlbWVudHMv MS4xLyIgeG1sbnM6R0lNUD0iaHR0cDovL3d3dy5naW1wLm9yZy94bXAvIiB4bWxuczp4bXA9 Imh0dHA6Ly9ucy5hZG9iZS5jb20veGFwLzEuMC8iIHhtcE1NOkRvY3VtZW50SUQ9ImdpbXA6 ZG9jaWQ6Z2ltcDo0M2Q5N2E0MS1mNGI1LTQ3NTItYTA3Zi1lMGE5MGIwMmJiOWYiIHhtcE1N

I'm running Windows 10 Pro (64-bit). I have two different versions of Thunderbird installed on my system; one is installed in Program Files (64-bit version 125.0.0.0 dated 04/23/2024—old version) and the other is installed in Program Files (x86) (64-bit version 115.12.2.0 dated 06/25/2024—the current version). The shortcut icon on my desktop (which I never use) runs the older version located in the Program Files folder while the shortcut icon on my taskbar (and also the one in my Start menu) runs the updated version located in the Program Files (x86) folder.

As an aside, there are 21 .dll files in the Program Files (x86) folder (all starting with api-ms-win and dated 09/27/2023) while none of those files are in the Program Files folder.

FYI, I have been using Thunderbird on this PC for almost five years.

How do I fix this problem so that I have only the current version of Thunderbird run from the proper folder, Program Files?

I've configured an external gpg key for use in Thunderbird, but I'm unable to decrypt an encrypted message sent to myself via thunderbird. I've attached the error thunderbird gives me.

Sending a normal email, a signed email and an encrypted email works just fine. Verifying a signed email also works fine.

Extracting the GPG message, and attempting to manually decrypt it via gpg gives me the following error:

$ gpg --decrypt enc.txt gpg: encrypted with cv25519 key, ID 0xREDACTED, created 2020-01-01

     "REDACTED"

gpg: encrypted with cv25519 key, ID 0xREDACTED, created 2020-01-01

     "REDACTED"

gpg: [don't know]: invalid packet (ctb=2d) gpg: [don't know]: invalid packet (ctb=2d)

I followed the instructions here to setup my YubiKey OPGP w/ Thunderbird: https://wiki.mozilla.org/Thunderbird:OpenPGP:Smartcards#Configure_an_email_account_to_use_an_external_GnuPG_key

Now and then, when I press the Enter key, Thunderbird moves the current email message from Inbox to Trash instead of opening the message in a new tab.

I am using Version 115.11.1 (32-bit) on Windows 11.

I would like to delete a mail without opening the mail or without a right-click.

Please refer the images to understand what I am saying.

The attached pic is from Windows default Mail app. I was talking about the red delete icon. Is it available in thunderbird too?

Thank you.

I have various multi-members set up on TB. Most of the time, I use them just as they are, but on occasion, I would like see the members of the list displayed in the "TO" field of the email, so I can delete one or two of them from a specific email. Is there a way to do this?

In Windows Live Mail, for example, clicking on the name of the list would display the members. This doesn't work in TB. Is there a similar function?

Hello, When I try to add my Gmail account into thunderbird, it goes this way : - enter my id and PWD - continue : IMAP and SMTP servers are automatically detected - continue : I am redirected to a google sign in window where my id is already filled. - continue : instead of asking my PWD, Google sends a 400 bad request error.

How can I add my Gmail address?

Thank you. Juliette