![Thunderbird logo](https://assets-prod.sumo.prod.webservices.mozgcp.net/media/uploads/products/2024-02-12-07-36-53-599028_1.png)
The RETR command did not succeed. Error retrieving a message. Mail server pop.webhost.dynadot.com responded: nding message
This started after I updated to Win10. I reverted to v8.1 and it did not go away. I contacted the isp and they are able to log into my account with no problems. I set up my iPOD to access and it did work.. So the account is not the issue. I deleted the profile. No change. I deleted all emails from the ISP queue for my emails after reading that it could be a bad email message. No change. I uninstalled and reinstalled. No change I uninstalled and deleted all entries I could find in the registry and deleted all files I could find on the computer except the installer. Re installed and entered the account information. No change. When getting mail at the bottom of the TB window it shows that it is trying to get 1 of 79 messages but give this error.
The RETR command did not succeed. Error retrieving a message. Mail server pop.webhost.dynadot.com responded: nding message
I have done a message dump and here is the end with the error.
2015-12-25 01:23:07.175000 UTC - 0[1e11140]: POP3: Entering state: 3
2015-12-25 01:23:07.175000 UTC - 0[1e11140]: RECV: OK sending message
2015-12-25 01:23:07.175000 UTC - 0[1e11140]: POP3: Entering state: 19
2015-12-25 01:23:07.175000 UTC - 0[1e11140]: ERROR: pop3RetrFailure
2015-12-25 01:23:09.550000 UTC - 0[1e11140]: POP3: Entering state: 24
2015-12-25 01:23:09.623000 UTC - 0[1e11140]: Calling ReleaseFolderLock from AbortMailDelivery
2015-12-25 01:23:09.623000 UTC - 0[1e11140]: ReleaseFolderLock haveSemaphore = TRUE
2015-12-25 01:23:09.625000 UTC - 0[1e11140]: POP3: Entering state: 25
2015-12-25 01:23:09.625000 UTC - 0[1e11140]: Clearing server busy in POP3_FREE
2015-12-25 01:23:09.625000 UTC - 0[1e11140]: Clearing running protocol in POP3_FREE
2015-12-25 01:23:09.626000 UTC - 0[1e11140]: Clearing server busy in OnStopRequest
2015-12-25 01:23:09.656000 UTC - 0[1e11140]: ~nsPop3Protocol()
2015-12-25 01:23:09.656000 UTC - 0[1e11140]: Calling ReleaseFolderLock from ~nsPop3Sink
2015-12-25 01:23:09.656000 UTC - 0[1e11140]: ReleaseFolderLock haveSemaphore = FALSE
I am at a loss to figure this out.
All Replies (11)
Is there an anti virus or a firewall here? Usually these errors fall into three categories.
1. The index of message numbers used by the server is different to the one Thunderbird has saved from previous sessions. Often because the provider has changed software on their server. This can be fixed by deleting the popstate.dat file for the account. There is one in each server folder in the mail folder in your profile.
2. Anti virus software is making an absolute hash of scanning your mail. Complaints appear to most common immediately after a version upgrade, but I have no idea why. TO solve, you may have to go as far as removing and reinstalling the anti virus or replacing it. Most have an off option, but there have been many reports over the years that using them does not solve issues with sending or receiving.
3. Firewall Software. This one is almost always immediately after an upgrade to Thunderbird or the installation. But there are exceptions. Check whatever firewall you are using to ensure Thunderbird has full internet access. Auto is not sometime sufficient. Be careful of version numbers. Thunderbird 38.4.0 is not 38.4.01 as far as most of these software firewalls are concerned.
Additionally Defender appears to require the Thunderbird process be excluded from it's supervision on some installs. Again I only have the anecdotal evidence of this forum to go by.
Thanks Matt.
I have removed everything in regards to TB. The message numbers are matching. If the isp shows 20 messages TB show it is trying to download 20 messages.
I forgot to include that I on the revert to 8.1 and the reinstall of 10 I did not reinstall my antivirus. I also disabled Defender and the firewall after the upgrade to test. That did not help.
My email was working up until I upgraded to Win10. I can not remember if it worked for the first day after the upgrade. I know that I updated TB shortly after because I could not get messages.
Thanks.
John
Looking less of a Thunderbird issue at this time. I was able to get messages from a different ISP. I also loaded Opera and wasn't able to get messages from the main ISP. Thanks for the help.
To go way back here
pop.webhost.dynadot.com responded: nding message
That is a nonsense error.
What Thunderbird is getting is nonsense, looks like the end of an error message. What errors did Opera give you?
Here is the end of the log from Opera.
6/12-2015 12:11:35 POP OUT: RETR 1
26/12-2015 12:11:35 POP IN: OK sending message
26/12-2015 12:11:35 Parse error: syntax error
26/12-2015 12:11:35 POP IN: Received: from 74.125.82.41 by webhost.dynadot.com with SMTP; 12 Dec 2015 21:18:26 +0000 Received: by wmpp66 with SMTP id p66so15508061wmp.1
for <email cut>; Sat, 12 Dec 2015 13:18:24 -0800 (PST)
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
d=gmail.com; s=20120113; h=mime-version:date:message-id:subject:from:to:content-type; bh=JHiTlgVztmS/FFZnr1yfijIyREnbhYYZxmtxJdNfW4s=; b=fRfBULz9fkeIUmgkvXwylYLDiHpQyRPhJjMfUpMxsu6NLbHPlaFMUBMXHCj9wmOwgW SjbnP7v984SdUPBbDZQdwf7ZmPxFQBsA8KANJ6syNWyXB4ipRp1a2NIMWu/bToG5nlDv fT/79iMszgr5MgVhED+eKJB2mhP2u26nDkcHrBLUi/TrAbdbwD/RJBCMXMJz3NMWa53t 8/tx7pe5jDY8EXu1QenUBh3+pcJvXf5qBQzoLV+8J8x5ROaRfI6n1ry96eqcb/z16V2c h2ufZr2pb0R5R/0QIA8liT7Prvrt+mFNqrmENrD6OD3RdeCPX5Ae1PzREjKpx2QLdnhF 20eQ==
MIME-Version: 1.0 X-Received: by 10.28.183.198 with SMTP id h189mr13942992wmf.44.1449955104773;
Sat, 12 Dec 2015 13:18:24 -0800 (PST)
Received: by 10.28.63.88 with HTTP; Sat, 12 Dec 2015 13:18:24 -0800 (PST) Date: Sat, 12 Dec 2015 13:18:24 -0800 Message-ID: <email cut> Subject: test From: John <email cut> To: <email cut> Content-Type: multipart/alternative; boundary=001a1148eb74f5e0c70526b9fa44
--001a1148eb74f5e0c70526b9fa44 Content-Type: text/plain; charset=UTF-8
test
--001a1148eb74f5e0c70526b9fa44 Content-Type: text/html; charset=UTF-8
--001a1148eb74f5e0c70526b9fa44-- .
26/12-2015 12:11:35 Parse error: syntax error
[Repeats cut out]
26/12-2015 12:13:35 POP IN: Disconnect
Here is the latest reply from the ISP:
++++++++++++++++++++
Our engineers have run many tests and we received the following update:
After SEND: RETR 1, he gets:'
2015-12-25 01:23:07.175000 UTC - 0[1e11140]: RECV: OK sending message
But we get:
0[3411140]: RECV: +OK sending message" The difference is the '+' is missing from your log. We are not sure why that is, since we do send the response with the plus sign. For some reason, your particular environment does not get that plus sign with the response.
++++++++++++++++++++++++++++++++
My environment is Win10.
hobsondrake trɔe
ok, lets make sure Thunderbird is not getting it either.
logs the Thunderbird connections https://wiki.mozilla.org/MailNews:Logging
Or Use telnet to actually connect to the port and type in the commands in text mode. see http://support.sasktel.com/app/answers/detail/a_id/20201/~/using-telnet-to-test-mail-server-connections-in-mac-os-x
Running telnet on my system after logging in I got a +OK.
Here is the start of the mail log.
2015-12-25 01:22:58.782000 UTC - 0[1e11140]: Setting server busy in nsPop3Protocol::LoadUrl 2015-12-25 01:22:58.860000 UTC - 0[1e11140]: Entering NET_ProcessPop3 1 2015-12-25 01:22:58.860000 UTC - 0[1e11140]: POP3: Entering state: 1 2015-12-25 01:22:58.860000 UTC - 0[1e11140]: POP3: Entering state: 2 2015-12-25 01:22:58.860000 UTC - 0[1e11140]: POP3: Entering state: 4 2015-12-25 01:22:58.860000 UTC - 0[1e11140]: RECV: (null) 2015-12-25 01:22:58.922000 UTC - 0[1e11140]: Entering NET_ProcessPop3 22 2015-12-25 01:22:58.922000 UTC - 0[1e11140]: POP3: Entering state: 4 2015-12-25 01:22:58.922000 UTC - 0[1e11140]: RECV: +OK POP3 server ready 2015-12-25 01:22:58.922000 UTC - 0[1e11140]: POP3: Entering state: 26 2015-12-25 01:22:58.922000 UTC - 0[1e11140]: SEND: AUTH
2015-12-25 01:22:58.954000 UTC - 0[1e11140]: Entering NET_ProcessPop3 1 2015-12-25 01:22:58.954000 UTC - 0[1e11140]: POP3: Entering state: 3 2015-12-25 01:22:59.032000 UTC - 0[1e11140]: Entering NET_ProcessPop3 30 2015-12-25 01:22:59.032000 UTC - 0[1e11140]: POP3: Entering state: 3 2015-12-25 01:22:59.032000 UTC - 0[1e11140]: RECV: -ERR please send USER command 2015-12-25 01:22:59.032000 UTC - 0[1e11140]: POP3: Entering state: 27 2015-12-25 01:22:59.032000 UTC - 0[1e11140]: POP3: Entering state: 28 2015-12-25 01:22:59.032000 UTC - 0[1e11140]: SendCapa() 2015-12-25 01:22:59.032000 UTC - 0[1e11140]: SEND: CAPA
2015-12-25 01:22:59.063000 UTC - 0[1e11140]: Entering NET_ProcessPop3 1 2015-12-25 01:22:59.063000 UTC - 0[1e11140]: POP3: Entering state: 3 2015-12-25 01:22:59.141000 UTC - 0[1e11140]: Entering NET_ProcessPop3 30 2015-12-25 01:22:59.141000 UTC - 0[1e11140]: POP3: Entering state: 3 2015-12-25 01:22:59.141000 UTC - 0[1e11140]: RECV: -ERR please send USER command 2015-12-25 01:22:59.141000 UTC - 0[1e11140]: POP3: Entering state: 29 2015-12-25 01:22:59.141000 UTC - 0[1e11140]: POP3: Entering state: 30 2015-12-25 01:22:59.141000 UTC - 0[1e11140]: ProcessAuth() 2015-12-25 01:22:59.141000 UTC - 0[1e11140]: POP auth: server caps 0x4AA, pref 0x1C00, failed 0x0, avail caps 0x400 2015-12-25 01:22:59.141000 UTC - 0[1e11140]: (GSSAPI = 0x100000, CRAM = 0x2000, APOP = 0x4000, NTLM = 0x8000, MSN = 0x10000, PLAIN = 0x1000, LOGIN = 0x800, USER/PASS = 0x400) 2015-12-25 01:22:59.141000 UTC - 0[1e11140]: trying auth method 0x400 2015-12-25 01:22:59.141000 UTC - 0[1e11140]: POP username 2015-12-25 01:22:59.141000 UTC - 0[1e11140]: POP3: Entering state: 5 2015-12-25 01:22:59.141000 UTC - 0[1e11140]: OnPromptStart() 2015-12-25 01:23:06.472000 UTC - 0[1e11140]: Entering NET_ProcessPop3 0 2015-12-25 01:23:06.472000 UTC - 0[1e11140]: POP3: Entering state: 48 2015-12-25 01:23:06.472000 UTC - 0[1e11140]: SendUsername() 2015-12-25 01:23:06.472000 UTC - 0[1e11140]: USER login 2015-12-25 01:23:06.472000 UTC - 0[1e11140]: SEND: USER john@cutout
2015-12-25 01:23:06.644000 UTC - 0[1e11140]: Entering NET_ProcessPop3 1 2015-12-25 01:23:06.644000 UTC - 0[1e11140]: POP3: Entering state: 3 2015-12-25 01:23:06.722000 UTC - 0[1e11140]: Entering NET_ProcessPop3 22 2015-12-25 01:23:06.722000 UTC - 0[1e11140]: POP3: Entering state: 3 2015-12-25 01:23:06.722000 UTC - 0[1e11140]: RECV: +OK password required
Could you please copy and paste the accounts information from Troubleshooting information on the help menu.
I hope this is what you are asking for Matt. Thank you for your help.
Application Basics
Name: Thunderbird Version: 38.4.0 User Agent: Mozilla/5.0 (Windows NT 10.0; WOW64; rv:38.0) Gecko/20100101 Thunderbird/38.4.0 Profile Folder: Show Folder
(Local drive) Application Build ID: 20151119061742 Enabled Plugins: about:plugins Build Configuration: about:buildconfig Memory Use: about:memory
Mail and News Accounts account1: INCOMING: account1, , (pop3) pop.webhost.dynadot.com:110, plain, passwordCleartext OUTGOING: smtp.webhost.dynadot.com:1025, plain, passwordCleartext, true
account2: INCOMING: account2, , (none) Local Folders, plain, passwordCleartext
Crash Reports
Extensions Lightning, 4.0.4.1, true, {e2fda1a4-762b-4020-b5ad-a41df1933103}
Important Modified Preferences
Name: Value
browser.cache.disk.capacity: 358400 browser.cache.disk.smart_size_cached_value: 358400 browser.cache.disk.smart_size.first_run: false browser.cache.disk.smart_size.use_old_max: false extensions.lastAppVersion: 38.4.0 font.name.monospace.el: Consolas font.name.monospace.x-cyrillic: Consolas font.name.monospace.x-unicode: Consolas font.name.monospace.x-western: Consolas font.name.sans-serif.el: Calibri font.name.sans-serif.x-cyrillic: Calibri font.name.sans-serif.x-unicode: Calibri font.name.sans-serif.x-western: Calibri font.name.serif.el: Cambria font.name.serif.x-cyrillic: Cambria font.name.serif.x-unicode: Cambria font.name.serif.x-western: Cambria font.size.fixed.el: 14 font.size.fixed.x-cyrillic: 14 font.size.fixed.x-unicode: 14 font.size.fixed.x-western: 14 font.size.variable.el: 17 font.size.variable.x-cyrillic: 17 font.size.variable.x-unicode: 17 font.size.variable.x-western: 17 mail.openMessageBehavior.version: 1 mail.winsearch.firstRunDone: true mailnews.database.global.datastore.id: d11151e3-644f-43a7-a1dc-b5b04e34047 network.cookie.prefsMigrated: true network.predictor.cleaned-up: true places.history.expiration.transient_current_max_pages: 104858 plugin.importedState: true
Graphics
Adapter Description: Intel(R) HD Graphics 4600 Vendor ID: 0x8086 Device ID: 0x0416 Adapter RAM: Unknown Adapter Drivers: igdumdim64 igd10iumd64 igd10iumd64 igd12umd64 igdumdim32 igd10iumd32 igd10iumd32 igd12umd32 Driver Version: 10.18.15.4256 Driver Date: 7-17-2015 Direct2D Enabled: false DirectWrite Enabled: false (10.0.10586.0) ClearType Parameters: ClearType parameters not found WebGL Renderer: false GPU Accelerated Windows: 0
AzureCanvasBackend: skia AzureSkiaAccelerated: 0 AzureFallbackCanvasBackend: cairo AzureContentBackend: cairo
JavaScript
Incremental GC: 1
Accessibility
Activated: 0 Prevent Accessibility: 0
Library Versions
Expected minimum version Version in use
NSPR 4.10.10 4.10.10
NSS 3.19.2.1 Basic ECC 3.19.2.1 Basic ECC
NSS Util 3.19.2.1 3.19.2.1
NSS SSL 3.19.2.1 Basic ECC 3.19.2.1 Basic ECC
NSS S/MIME 3.19.2.1 Basic ECC 3.19.2.1 Basic ECC
Matt, any progress on this issue?