Thunderbird Support Forum

Like all of us, I get bombarded with spam emails. So I set up filters to separate the "definitely spam" from "possibly spam". I've been doing this for many years now. But recently, maybe for the past few months, I'm finding that these blacklist filters aren't working anymore. The filtering failure seems to be getting worse as time goes on. And, yes, I do a match on "any", but that still doesn't work. As I said above, my filtering rules used to work just fine, but possibly a new Thunderbird update several months ago broke filtering?

Also, is there a way for filtering on the message content URL? I find that sometimes that's the only way to distinguish spam.

Without notice, Thunderbird today required me to sign-in to my Google account and then produced a window in which it said it wanted to access to my mail, contacts and calendar; in order to compose, send, share, delete permanently, among actions on my personal content. I tried to "Deny" (see below) but the window just returned and returned and could not be deleted. (see "Uploaded images", below for the content of this window).

Is this a scam? Or the result of a hacker?

We had a storm and now email doesn't work. We are a business and have to have email. I've went in and changed the Mozilla password and when go back to email it won't accept it. Emails aren't coming through. Can't sign in. What do I do?

When I launched Thunderbird today, it would not connect to one mailserver: imap.mailfence.com. At the same time, Thunderbird said to restart to update to 115.2.2. After updating, it still refuses to connect. There is nothing wrong with Mailfence and I do not find anything wrong with the configuration settings in Thunderbird. I even tried to set up my Mailfence email account again but it failed because it could not connect. Ideas? Thank you.

Our small business has a handful of Zoho email addresses that we use via Thunderbird on MacOS computers in our office. The computer I am using only has some of the email addresses listed in Thunderbird, and I am trying to add the rest.

Once all requested data is entered in the "Set Up Your Existing Mail Address" screen, we receive the error message: "Unable to log in at server. Probably wrong configuration, user name, or password." All of the data is correct, and I have tried this process different weeks to see if the issue will clear on its own, but no. I've attached a screenshot of the error message.

I have tried this with several pre-existing email addresses and it's giving me the same message, although it did allow me to add one address recently. That newly added, previously existing address is now somewhat accessible via Thunderbird, but every time we open Thunderbird it says "Login to server imap.zoho.com with username shipping@jadeandpearl.com failed." I can access the inbox and other folders of this account in the Thunderbird desktop app, but it is not currently showing new email.

Thunderbird version: 115.12.1 (64bit) MacOS: Sonoma 14.5

This there a "Global" Message Filter Rule where you can change an Apply Filter When: to ALL your Message Filters?

Example: I'd like to add "Periodically, every 10 minutes" to ALL my current Message Filters. Currently, it looks like I have to Edit each and every one of them?

Thank you in advance.

I have over 35 email accounts, which I use Thunderbird to collect. Love Thunderbird for well over 2 decades!

I am wanting to have 2 of my email addresses to be downloaded before all the others. I have indeed successfully "moved" these 2 accounts to the top of my account list (Shift and mouse). However they are not downloaded in the order of the account list.

How do I accomplish this? Is it possible?

I created a ticket, and it auto-responded to run this by the Volunteer Community. I really want this to be handled by support, but welcome anyone to give me a solid answer.

Mark Robbins

Right now I'm using 3 different email accounts on Thunderbird. All 3 of them are Office365 accounts. For some reason, 1 of the 3 accounts is prompted at least once a day, sometimes twice a day, to enter my password on the Office365 website popup that is used with the OAuth2 authentication process. It's very irritating, all 3 accounts are Microsoft Office business accounts. What would be the reason why it needs to authenticate daily? Is there no password manager to do this automatically once it's been entered once? Can I pick a different authentication method? What is the correct change to make so I don't have to keep typing in my password every day?

See the previous, now archive post about it.

If this option makes emails sent from Thunderbird to any other email client have arbitrary line breaks where the line changes in the view of the composer. Please explain to me like I am 5, why is this ON by default? I just spent hours wording and formatting a work email vital for my career just to find out it will most likely look like a poem to the person that reeds it. This mailnews.wraplength "feature" looks a lot like is there to signal to other non-Thunderbird users to use Thunderbird. I really really hope there is a good explanation for why `mailnews.wraplength` exists and is on by default.

"Unable to write the email to the mailbox. Make sure the fle system allows you write privileges, and you have enough disk space to copy the mailbox."

After years of working fine, this message has started appearing whenever TB tries to retrieve messages. I've checked that there's enough space (there's many GB free). I've checked the authorisations of the email folders, they're all fine (Full Control in all cases). I found an answer in a forum suggesting that a rogue antivirus might be the problem, but I'm only using MS Defender.

In desperation I removed the entire Roaming/Thunderbird folder, uninstalled TB, reinstalled it (version 115.12.2), created a new profile for my email address (it's a Yahoo email address, and I can retrieve the emails directly through the Yahoo Mail website with no problems). But I'm still getting the same error message. TB tries to retrieve the messages, it says 'Retrieving message 1 of 105' for several minutes, then the error message popup, and nothing appears in the Inbox. (105 is all the incoming messages as of now since this started happening).

I'm completely stuck. Any suggestions?

I back up my TB profile every few months. I just went thru the Cox-Yahoo email conversion and I am getting emails. When I did my back up, I noticed in the properties it had one more folder and the files went from 1311 to 2585 files. Is something wrong? Do I need to compare and research what is causing this or just move on!

Short background: Critically low on disc space. Windows pointed out a potentially extraneous 8.5gb NS3TMP Thunderbird file. Extensive Googling convinced me it would be safe to delete this file. To be safe (HA!) I first copied it to an external drive just in case things went south. They did.

After the copy, I went back and deleted the NS3TMP file. However, much to my horror, instead of deleting 8.5gb as expected, 30.5gb got deleted. After that, Thunderbird would not start claiming my profile was missing.

I copied the 8.5gb backup file back to its original place. No joy. Same message from Thunderbird.

At this point, I recreated my profile pointing Thunderbird to my Outlook email account.

I could now sign into Thunderbird and T'bird started populating the inbox and sent folders, but only partially. Worse (MUCH worse) my critical Thunderbird local folders were nowhere to be found. I attempted several folder recovery procedures to no avail.

I confess, I do not know how Thunderbird works its magic behind the scenes. Were my local folders part of the surprise 30gb file deletion and thus gone for good? Would the original emails that had been dragged into the various folders still be sitting on Outlook's servers?

As I said, totally self-inflicted but hopeful there's a road to recovery.

Any assistance or consoling words would be much appreciated.

The default attribution line created by Thunderbird when replying doesn't work well when sending e-mail to Outlook users. [Unfortunately, Outlook users comprise 100% of the people to whom I send emails in TB.] TB's default attribution line causes Outlook OWA to hide the entire reply from the reader unless they click on a [...] button to show it. Then when displayed, the entire message is quoted/indented.

Yes, this is a bug in Outlook. No, it's not going to get fixed.

This can be avoided by changing the attribution line which current defaults to:

       On <date> <time>, <name> wrote:

Simply adding a space after the colon at the end of the line "fixes" the problem, but it's annoying to have to do that manually.

Can that attribution line be configured somewhere?

I've found all sorts of addons that let you muck with the headers of replies, but the headers are fine. It's just the attribution line that needs to be fixed.

"Sending of password for user joebernard@verizon.net did not succeed. Mail server pop.verizon.net responded: [SYS/TEMP] Server error - Please try again later"

^^This message comes up every time I try to send an email. It can be received outside of Thunderbird and to other addresses.

TSO Host migrated all my email accounts to a different server. All my emails have stopped downloading to Thunderbird. I cannot find a way to configure my TSO Host email accounts since they upgraded their servers to Cpanel deluxe yesterday and neither can anyone at TSO Host.

So... just upgraded to 115.12.2, and I'm seeing that the columns have been removed -- and I don't see a way to re-enable them!

So on the main view, we now have a line.... from address with subject below, and then to the far right, the date/time.

Is there no longer a view with columns that we could more easily see, sort, move, etc?!

Example of new view is attached.

I would like to set up an email account with a pen name that I am using as an author. Is there a way to do that without giving my actual credentials? Thanks for your kind attention.