Ẹyẹ àrá Support Forum

System specs below. Thunderbird is set with 1 account: A paid Yahoo email, with a LOT of messages (well over 36K), using IMAP (Yahoo only lets the most recent 10K come down via IMAP, sadly). Most emails do download and are correctly rendered. But around 10%, starting usually a month or so back from the high water mark of last update, show email source code (text of headers, mimeparts, etc.) for a totally different email than the one highlighted (a few days later, different sender, etc.) Checking the message on Yahoo, it renders correctly. There is no pattern to the corrupted messages: they can be from mailing lists, company marketing mails, an alert from my local town, whatever.

Once the error occurs, it is consistent across Thunderbird shut-and-restarts (still showing same wrong email source as before). Emails to either side (earlier and later) render properly in the message pane.

Double Clicking the message to it's own child pane renders a pane with Subject and From as blank, and the same email source text for a different email. Forwarding the email puts the email source code in as text (I was hoping the act of refreshing and reformatting might grab the correct content, but no).

Doing a Repair Mailbox (which seems to mean "download headers again, then download all the mail again" does seem to correct for a time (including the previously corrupted emails now rendering correctly)... but within a day or two, a new crop of messages will be corrupted, and the dance starts again.

Windows 10, 64 bit. Norton 360 set to exclude all mailbox directories. Thunderbird 115.12.2 (64-bit), though this has been happening since 110. No plugins, no extensions.

Are there diagnostic logs or other info I can share that can help us figure this out? I really like Thunderbird, but it's just unusable here. Outlook, Apple mail, other tools don't seem to have this problem.

Hello --

Not sure when this happened.

Got 2 email accounts, account X and account Y. All was working fine until today, 6/27/24. Both have different outgoing SMTP servers.

Now I am trying to send, it is asking for passwords, which I have and is 100% correct. In fact, if I put in wrong password it tells me, so I know it is communicating. When I put in the correct password, I get a timeout on BOTH SMTP servers.

I disabled Norton Firewall.

Works fine from another PC app (poppeeper) and from my android (k9 mail). Both accounts are IMAP.

Neither SSL/TLS or STARTTLS makes a difference. Nor did a re-boot.

TB 115.12.2 (64 Bit) on Windows 10

Sending of the message failed. The message could not be sent because the connection to Outgoing server (SMTP) mailroom4.hostrocket.com timed out. Try again.

Description: hostrocket Server Name: mailroom4.hostrocket.com Port: 465 User Name: ernie@e(redacted).com Authentication method: Normal password Connection Security: SSL/TLS

Anything change?

Microsoft is changing the authentication method for outlook mail to OAuth2. I follow the guide provided to update Thunderbird, but my version of the program does not have OAuth2 as an option. My outgoing server is smtp-mail.outlook.com, but OAuth2 is not an option in the dropdown for authentication method.

Hello! Thunderbird has stopped downloading messages from my Yahoo+ account. I can send messages from it OK. When I try to get it to download, it says: Checking Inbox for new messages... and waits at this point. Then I get: Host Contacted, sending login information... Then it waits for a long time. Eventually, it indicates "No messages to download", and then goes back to "checking inbox for new messages". If I click "Get Messages", a pop-up comes up with: "Error with account... and below: The account fischer94563@yahoo.com is being processed. Please wait until processing is complete to get messages." I've deleted the APP and downloaded and installed a new copy. No changes. Deleted and reentered my password with Yahoo. I'm at a loss to understand why this is happening, but it was working fine until recently. Any thoughts? Thanks. Kevin

A couple of days ago I had to change my default browser from Firefox to Chrome to fix a problem on a particular company's web site. After I made Firefox the default browser again I found that every hyperlink in an email or a document that I clicked on opened Firefox at the same web page: "https://read.amazon.com/landing".

I have no idea what I might have done to create this situation, let alone how to undo it.

I am using Linux Mint with Firefox, Thunderbird and Libre Office.

Peter

Exported address books and lists from 115.12.1 (32 bit) on W8.1, importing to 115.11.1 (64 bit) on W11.

Importing a named list into personal address book works - but the list itself is lost; they all go into one big address book. If I choose Create a new folder they all go into that - but again I've no list name, I can't write a message to the list like I used to be able to.

I can select New Mailing List, give it a name, but now I seem to have to enter each one individually, I see no way to paste in a list.

What am I doing wrong please?

I have received an email from Microsoft informing me of changes to its authentification procedure. As from Sept, to continue using Thunderbird to access my outlook/hotmail accounts, I have to change the authentification method to Oauth2. The reasons and changes required are detailed here: https://support.mozilla.org/en-US/kb/microsoft-oauth-authentication-and-thunderbird-202 I have 2 problems. 1. imap-mail.outlook.com - I can change my authentification method to Oauth2. However, when I then try to access my mail via TB, I get an error stating that the server imap-mail.outlook.com does not support the authentification method! (see image) 2. Outgoing Server SMTP There is no Oauth2 option available to choose!

Can anyone help? I am using the most up to date version of Thunderbird 115.12.2 (64-bit).

Issue began Monday 7/1 where Thunderbird would not receive new email from AOL. At times it would tell me to enter the password. But the p/w I entered was not correct so that made situation worse. Found "Saved Passwords" in Help->Settings where I was able to retrieve the -correct- p/w for one of the email addresses being actively used in Thunderbird and problem solved. When I went to find the correct p/w for the other email address, the account in "Saved Logins" was not there?? Was odd that the list did display email accounts I haven't used in years, but not the 2nd one that I use daily! I tried changing the p/w at AOL Mail, but that didn't work for either of my two accounts. Bottom line, why isn't lf82me@verizon.net showing up in the "Saved Passwords" in Settings?

There's an article that says we can change where attachments are stored by going to tools, options, attachments. However, I have no "options" under "tools." Thanks in advance.

I have a custom domain (me@mydomain.com) with email / contacts / calendar hosted by Google Workspace. I initially managed to add both the email and calendar account to Thunderbird but recently the calendar stopped syncing.

I tried to fix the problem by first removing the calendar account. This did not work because the 'Create New Calendar' -> 'On the Network' account wizard does not prompt me for the Google OAuth2 login page but just asks me for a password and fails. I tried to supply several 'Location:' URLs like gmail.com, calendar/accounts.google.com but none lead to the Google OAuth2 page.

Finally I removed the email account too and re-added it. During the new account setup workflow Thunderbird seems to look for calendars too but failed to find any...

How do I proceed? How are you supposed to set up a Google Calendar on a custom domain using the OAuth2 sign-in procedure?

IF I SEND AN EMAIL TO MYSELF, JUST ONE WORD AS A TEST, I HIT "SEND", AND IT IMMEDIATELY GOES AND ARRIVES, AS PER NORMAL. FINE. IF I SEND EXACTLY THE SAME ONE WORD EMAIL TEST TO, FOR EXAMPLE, MY WIFE, OR ANY OTHER INDIVIDUAL RECIEPIENT, IT TAKES A LONG TIME TO EVEN SEND. I GET A PROGRESS BAR AS IF I WAS SENDING A LARGE RAW FILE OR SOMESUCH. LIKEWISE IF I SEND THE EMAIL TO ME AND CC IT TO ONE OTHER PERSON IT TAKES AGES TO SEND. ONLY AN EMAIL TO MYSSELF ALONE WORKS AT THE USUAL SPEED. MY BROADBAND SPEED IS FINE. I HAVE USED THUNDERBIRD FOR YEARS ON DIFFERENT LAPTOPS AND DIFFERENT COMPUTERS WITHOUT THIS ISSUE. I DO NOT KNOW WHAT TO DO, CAN YOU HELP?

I would like messages I identify as junk, or messages automatically identified as junk, go to the spam or junk folder. All junk messages remain the main inbox.

On the other hand, in my "spam" folder are many emails that have gotten sent there automatically, but none of them are identify as spam (by the fire symbol being lit up).

In settings, I have "junk settings, box check on new junk messages to:, other, spam.

I also tried box check on new junk messages to:, Junk folder on:

I use Thunderbird 115.12.2 (64-bit) with Hotmail, using a local account on Windows 10. Microsoft is introducing 'modern authentication' on Hotmail, and I want to be ready for this, but I cannot follow the guidance at https://support.microsoft.com/en-gb/office/modern-authentication-methods-now-needed-to-continue-syncing-outlook-email-in-non-microsoft-email-apps-c5d65390-9676-4763-b41f-d7986499a90d

If I try to alter my existing Thunderbird Account Settings for my Hotmail account, the authentication method for Outgoing Server (SMTP) is shown as Normal Password but there is no option to change it to OAuth2. If I delete and recreate my Hotmail account in Thunderbird, I get an error message from Microsoft saying that I cannot log in because my browser is not set to allow cookies -- even though I believe I have set both Thunderbird and Firefox (my default browser) to allow cookies.

When checking my email the 'Thunderbird' status bar says "downloading message' (as normal), but sometimes the message does not appear in my Inbox or any folder.

I'm using Thunderbird 115.12.0 on Linux Ubuntu. The email is downloaded via the POP protocol.

I have checked on the server and nothing is left there.

Using the Thunderbird search function on 'date' only, the e-mails actually in the inbox or folders show up, not the one purported to have been downloaded.

All of my folders are set to 'Unthreaded'.

Any ideas please?

Hi, Any time I'am connecting to email addresses ending by @akeonet.com (SFR compagny) on THUNDERBIRD, I'm receiving a message asking me my password imap.sfr.fr. Same to send a message exit server (STMP) smtp.sfr.fr.

Problem is the existing password is not working anymore with THUNDERBIRD but is still working with the webmail of SFR ????

I'am don't have such problem with addresses ending by @gmail !!!!!

Can you help to reconnect THUNDERBIRD to server SFR/ Neuf ?

Thank you to help me to solve the problem.

Claude

Thunderbird crashed during a normal close (https://crash-stats.mozilla.org/report/index/3c0242b0-1a55-4eba-9f02-4a7bc0240126) and since then when I open Thunderbird, tabs appear for the messages I had open at the time of the crash, but they are all blank, and the tabs themselves are all empty. It is as if they are place-holders that are then never populated. I've attached a screen shot showing some of these tabs, with the crash report tab open and displayed.

About 1-2 months ago I reindexed folders due to mail apparently being missing and this resulted in a huge number of messages that had previously been dealt with becoming marked as unread again.

Ideally I would like the blank tabs to be reinstated and to be able to carry on working on my email from where I left off, but if this is not possible, I need to be able to identify the emails that were open in the tabs to be able to pick up the pieces. This is crucially important as I operate multiple accounts and it would be impossible for me to re-establish state any other way, especially in view of the earlier problem with email becoming marked as unread again. That would condemn me to needing to re-open many thousands of email items to identify those that may need action.

I renamed global-messages-db.sqlite which has been recreated and rebuilt but nothing has changed. The rebuilt file is significantly smaller than the original and if this implies that there has been data loss, I would rather reinstate the original file, if it is safe to do so.

My best guess is that the tabs are defined within history.sqlite and I have made a copy of this file but superficially it appears to contain a lot more than just tabs and it has been updated since the crash.

The most recent change I made to my Thunderbird configuration before the crash was the addition of the British-English dictionary.

The next most recent change to my Thunderbird configuration was the addition of a Proton Mail account using Proton Mail Bridge. I am accessing this account on behalf of someone who has sustained serious injuries and is unable to access it themselves. If this added account or Proton Mail Bridge is implicated in the crash in any way, I would prefer to remove the account and the Bridge software.

Many thanks in advance for your help and guidance with this problem.

Nikita

as stated in the title, my HDD failed the other day and on recovery, my Thunderbird seems to have failed too.

I know (sort of) that it is all driven by the Profile.ini file.

But everytime I relaunch TB (even after what I think is an uninstall and a reinstall) I am getting : "Your Thunderbird profile cannot be loaded. It may be missing or inaccessible."

I would be happy enough to have a blank TB load up and I would reconfigure my various email accounts. but I cannot seem to do even that.

I know there is a trick to getting to a Thunderbird configurator....but I have forgotten what it is.

Where does TB "look" when it starts up? how would I control that?

I have a Windows 10 pc, which is current with all Microsoft and manufacturer (Lenovo) updates. Thunderbird won't run since the last update. It just gives a message saying, "Your computer must be restarted to complete a previous upgrade of Thunderbird. Do you want to reboot now?" After several reboots, I have given up. A support forum solution from 4 years ago recommends deleting a file (global-messages-db.sqlite) at a location (C:\Users\user\AppData\Roaming\Thunderbird\Profiles\8charstring.default) that seems not to exist (hidden?) on my pc. What do you suggest? Thanks.

Hello! I'm trying to subscribe to the calendar at this link: webcal://github.com/othyn/go-calendar/releases/latest/download/gocal__community_day.ics

But when I add the calendar to Thunderbird using New Calendar... > On The Network, it resolves that URL to this very long different URL: https://objects.githubusercontent.com/github-production-release-asset-2e65be/580172601/b8d41b00-ad34-4a4f-937b-55ab6a554213?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=releaseassetproduction%2F20240625%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20240625T114538Z&X-Amz-Expires=300&X-Amz-Signature=10a1c88bd26110f81b16dd6f839ce758de482cc6c450135e518550bb3eed5840&X-Amz-SignedHeaders=host&actor_id=0&key_id=0&repo_id=580172601&response-content-disposition=attachment%3B%20filename%3Dgocal__pokemon_spotlight_hour.ics&response-content-type=application%2Foctet-stream

The resulting calendar then works for one day but then disables itself and cannot be re-enabled (if I try to enable the calendar, it immediately disables itself again). I think this is happening because the calendar at the webcal link updates to a new file every day, so the specific link that Thunderbird resolves to becomes invalid on a daily basis. Other calendar applications that I use (like the iOS calendar app and the web interface for mailbox.org) do not resolve the link (they just leave it as webcal://github.com/othyn/go-calendar/releases/latest/download/gocal__community_day.ics) and they work fine, which is why I think the link resolution is causing the issue.

Is there a way to get this type of webcal link to work with Thunderbird?

I also filed a bug report here https://bugzilla.mozilla.org/show_bug.cgi?id=1906077