Thunderbird Support Forum

Exported address books and lists from 115.12.1 (32 bit) on W8.1, importing to 115.11.1 (64 bit) on W11.

Importing a named list into personal address book works - but the list itself is lost; they all go into one big address book. If I choose Create a new folder they all go into that - but again I've no list name, I can't write a message to the list like I used to be able to.

I can select New Mailing List, give it a name, but now I seem to have to enter each one individually, I see no way to paste in a list.

What am I doing wrong please?

I can't SEND on Thunderbird as of Update to Version 115.12.1 on 6/19. I was able to SEND on June 18th and left town for a week and when I came back could not Send. That could be a coincidence. Have Windows 11, with Defender Firewall and Security virus protection. I have TB version 115.12.2 up to date. I have checked with Spectrum for the correct configuration and currently I have as Description: SMTP Server (on top line); Server Name: Mail.brighthouse.com and Port 465, No Authentication and SSL/TLS. My User Name: e-mail address ends in @tampabay.rr.com and that is the same as shown on incoming server.

My husband just downloaded TB program on his Windows 8.1 which is my old computer that I've been running TB on for 15 years without a hitch!! ''''And he also cannot SEND.'''' It's very frustrating - we've tried changing server settings since Spectrum uses not only Brighthouse (which is the one they say covers the Tampabay.rr.com address) but they also use Mobil.charter.net and also TWC.com. I've tried changing them up but nothing works. I've tried changing Ports and anything I could change I did, but nothing works. I did get a couple of error msgs but they didn't help. Brighthouse timed out and another msg was saying that the email address I was sending as had to match the email address of the authentication and that didn't make sense as I have only had one address & (typed correctly in all places). I have called Spectrum more than once and asked for an upper level, however, they were no help at all saying they have no resp. for 3rd party etc. I HOPE YOU CAN HELP SOLVE THIS MYSTERY. Thank you!

Tabatha

I have received an email from Microsoft informing me of changes to its authentification procedure. As from Sept, to continue using Thunderbird to access my outlook/hotmail accounts, I have to change the authentification method to Oauth2. The reasons and changes required are detailed here: https://support.mozilla.org/en-US/kb/microsoft-oauth-authentication-and-thunderbird-202 I have 2 problems. 1. imap-mail.outlook.com - I can change my authentification method to Oauth2. However, when I then try to access my mail via TB, I get an error stating that the server imap-mail.outlook.com does not support the authentification method! (see image) 2. Outgoing Server SMTP There is no Oauth2 option available to choose!

Can anyone help? I am using the most up to date version of Thunderbird 115.12.2 (64-bit).

Issue began Monday 7/1 where Thunderbird would not receive new email from AOL. At times it would tell me to enter the password. But the p/w I entered was not correct so that made situation worse. Found "Saved Passwords" in Help->Settings where I was able to retrieve the -correct- p/w for one of the email addresses being actively used in Thunderbird and problem solved. When I went to find the correct p/w for the other email address, the account in "Saved Logins" was not there?? Was odd that the list did display email accounts I haven't used in years, but not the 2nd one that I use daily! I tried changing the p/w at AOL Mail, but that didn't work for either of my two accounts. Bottom line, why isn't lf82me@verizon.net showing up in the "Saved Passwords" in Settings?

There's an article that says we can change where attachments are stored by going to tools, options, attachments. However, I have no "options" under "tools." Thanks in advance.

I have a custom domain (me@mydomain.com) with email / contacts / calendar hosted by Google Workspace. I initially managed to add both the email and calendar account to Thunderbird but recently the calendar stopped syncing.

I tried to fix the problem by first removing the calendar account. This did not work because the 'Create New Calendar' -> 'On the Network' account wizard does not prompt me for the Google OAuth2 login page but just asks me for a password and fails. I tried to supply several 'Location:' URLs like gmail.com, calendar/accounts.google.com but none lead to the Google OAuth2 page.

Finally I removed the email account too and re-added it. During the new account setup workflow Thunderbird seems to look for calendars too but failed to find any...

How do I proceed? How are you supposed to set up a Google Calendar on a custom domain using the OAuth2 sign-in procedure?

IF I SEND AN EMAIL TO MYSELF, JUST ONE WORD AS A TEST, I HIT "SEND", AND IT IMMEDIATELY GOES AND ARRIVES, AS PER NORMAL. FINE. IF I SEND EXACTLY THE SAME ONE WORD EMAIL TEST TO, FOR EXAMPLE, MY WIFE, OR ANY OTHER INDIVIDUAL RECIEPIENT, IT TAKES A LONG TIME TO EVEN SEND. I GET A PROGRESS BAR AS IF I WAS SENDING A LARGE RAW FILE OR SOMESUCH. LIKEWISE IF I SEND THE EMAIL TO ME AND CC IT TO ONE OTHER PERSON IT TAKES AGES TO SEND. ONLY AN EMAIL TO MYSSELF ALONE WORKS AT THE USUAL SPEED. MY BROADBAND SPEED IS FINE. I HAVE USED THUNDERBIRD FOR YEARS ON DIFFERENT LAPTOPS AND DIFFERENT COMPUTERS WITHOUT THIS ISSUE. I DO NOT KNOW WHAT TO DO, CAN YOU HELP?

I would like messages I identify as junk, or messages automatically identified as junk, go to the spam or junk folder. All junk messages remain the main inbox.

On the other hand, in my "spam" folder are many emails that have gotten sent there automatically, but none of them are identify as spam (by the fire symbol being lit up).

In settings, I have "junk settings, box check on new junk messages to:, other, spam.

I also tried box check on new junk messages to:, Junk folder on:

I use Thunderbird 115.12.2 (64-bit) with Hotmail, using a local account on Windows 10. Microsoft is introducing 'modern authentication' on Hotmail, and I want to be ready for this, but I cannot follow the guidance at https://support.microsoft.com/en-gb/office/modern-authentication-methods-now-needed-to-continue-syncing-outlook-email-in-non-microsoft-email-apps-c5d65390-9676-4763-b41f-d7986499a90d

If I try to alter my existing Thunderbird Account Settings for my Hotmail account, the authentication method for Outgoing Server (SMTP) is shown as Normal Password but there is no option to change it to OAuth2. If I delete and recreate my Hotmail account in Thunderbird, I get an error message from Microsoft saying that I cannot log in because my browser is not set to allow cookies -- even though I believe I have set both Thunderbird and Firefox (my default browser) to allow cookies.

When checking my email the 'Thunderbird' status bar says "downloading message' (as normal), but sometimes the message does not appear in my Inbox or any folder.

I'm using Thunderbird 115.12.0 on Linux Ubuntu. The email is downloaded via the POP protocol.

I have checked on the server and nothing is left there.

Using the Thunderbird search function on 'date' only, the e-mails actually in the inbox or folders show up, not the one purported to have been downloaded.

All of my folders are set to 'Unthreaded'.

Any ideas please?

Hi, Any time I'am connecting to email addresses ending by @akeonet.com (SFR compagny) on THUNDERBIRD, I'm receiving a message asking me my password imap.sfr.fr. Same to send a message exit server (STMP) smtp.sfr.fr.

Problem is the existing password is not working anymore with THUNDERBIRD but is still working with the webmail of SFR ????

I'am don't have such problem with addresses ending by @gmail !!!!!

Can you help to reconnect THUNDERBIRD to server SFR/ Neuf ?

Thank you to help me to solve the problem.

Claude

Thunderbird crashed during a normal close (https://crash-stats.mozilla.org/report/index/3c0242b0-1a55-4eba-9f02-4a7bc0240126) and since then when I open Thunderbird, tabs appear for the messages I had open at the time of the crash, but they are all blank, and the tabs themselves are all empty. It is as if they are place-holders that are then never populated. I've attached a screen shot showing some of these tabs, with the crash report tab open and displayed.

About 1-2 months ago I reindexed folders due to mail apparently being missing and this resulted in a huge number of messages that had previously been dealt with becoming marked as unread again.

Ideally I would like the blank tabs to be reinstated and to be able to carry on working on my email from where I left off, but if this is not possible, I need to be able to identify the emails that were open in the tabs to be able to pick up the pieces. This is crucially important as I operate multiple accounts and it would be impossible for me to re-establish state any other way, especially in view of the earlier problem with email becoming marked as unread again. That would condemn me to needing to re-open many thousands of email items to identify those that may need action.

I renamed global-messages-db.sqlite which has been recreated and rebuilt but nothing has changed. The rebuilt file is significantly smaller than the original and if this implies that there has been data loss, I would rather reinstate the original file, if it is safe to do so.

My best guess is that the tabs are defined within history.sqlite and I have made a copy of this file but superficially it appears to contain a lot more than just tabs and it has been updated since the crash.

The most recent change I made to my Thunderbird configuration before the crash was the addition of the British-English dictionary.

The next most recent change to my Thunderbird configuration was the addition of a Proton Mail account using Proton Mail Bridge. I am accessing this account on behalf of someone who has sustained serious injuries and is unable to access it themselves. If this added account or Proton Mail Bridge is implicated in the crash in any way, I would prefer to remove the account and the Bridge software.

Many thanks in advance for your help and guidance with this problem.

Nikita

as stated in the title, my HDD failed the other day and on recovery, my Thunderbird seems to have failed too.

I know (sort of) that it is all driven by the Profile.ini file.

But everytime I relaunch TB (even after what I think is an uninstall and a reinstall) I am getting : "Your Thunderbird profile cannot be loaded. It may be missing or inaccessible."

I would be happy enough to have a blank TB load up and I would reconfigure my various email accounts. but I cannot seem to do even that.

I know there is a trick to getting to a Thunderbird configurator....but I have forgotten what it is.

Where does TB "look" when it starts up? how would I control that?

I have a Windows 10 pc, which is current with all Microsoft and manufacturer (Lenovo) updates. Thunderbird won't run since the last update. It just gives a message saying, "Your computer must be restarted to complete a previous upgrade of Thunderbird. Do you want to reboot now?" After several reboots, I have given up. A support forum solution from 4 years ago recommends deleting a file (global-messages-db.sqlite) at a location (C:\Users\user\AppData\Roaming\Thunderbird\Profiles\8charstring.default) that seems not to exist (hidden?) on my pc. What do you suggest? Thanks.

Hello! I'm trying to subscribe to the calendar at this link: webcal://github.com/othyn/go-calendar/releases/latest/download/gocal__community_day.ics

But when I add the calendar to Thunderbird using New Calendar... > On The Network, it resolves that URL to this very long different URL: https://objects.githubusercontent.com/github-production-release-asset-2e65be/580172601/b8d41b00-ad34-4a4f-937b-55ab6a554213?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=releaseassetproduction%2F20240625%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20240625T114538Z&X-Amz-Expires=300&X-Amz-Signature=10a1c88bd26110f81b16dd6f839ce758de482cc6c450135e518550bb3eed5840&X-Amz-SignedHeaders=host&actor_id=0&key_id=0&repo_id=580172601&response-content-disposition=attachment%3B%20filename%3Dgocal__pokemon_spotlight_hour.ics&response-content-type=application%2Foctet-stream

The resulting calendar then works for one day but then disables itself and cannot be re-enabled (if I try to enable the calendar, it immediately disables itself again). I think this is happening because the calendar at the webcal link updates to a new file every day, so the specific link that Thunderbird resolves to becomes invalid on a daily basis. Other calendar applications that I use (like the iOS calendar app and the web interface for mailbox.org) do not resolve the link (they just leave it as webcal://github.com/othyn/go-calendar/releases/latest/download/gocal__community_day.ics) and they work fine, which is why I think the link resolution is causing the issue.

Is there a way to get this type of webcal link to work with Thunderbird?

I also filed a bug report here https://bugzilla.mozilla.org/show_bug.cgi?id=1906077

Tell me how I can continue to use thunderbird with the above account and also Denis.Clarke.hotmail.com after September 18. I have 4 individual historic E mail accounts and thunderbird joins them together. What do you need to do? To deal with threat below.

If you are receiving this email, you are currently using an email or calendar app that uses a less secure authentication method to connect to your Outlook.com email account. You will need to upgrade your third-party mail and calendar app to a version which supports modern authentication methods.

Hi, I've just had an email from Microsoft saying :-

Update your sign-in technology before September 16th, 2024 to maintain email access.

Is there a step by step tutorial on how to do this?

Regards,

Paul

Hello,

I have been using Thunderbird for many years without any issues. I recently bought a laptop running Windows 11. On this machine, I have two accounts that cannot send emails via SMTP. What is puzzling is that I can retrieve emails through IMAP without any problems.

For another account I had to use STARTTLS to get it working. But on my Windows 10 machine, the same account is sending emails correctly with SSL/TLS.

Thunderbird is allowed through the Windows firewall and is on the antivirus whitelist.

I recently fixed an issue (connecting to Gmail) by allowing cookies, so it might be a simple fix like that.

Could someone help me, please?

Many thanks!

Having followed the instructions at https://support.microsoft.com/en-gb/office/modern-authentication-methods-now-needed-to-continue-syncing-outlook-email-in-non-microsoft-email-apps-c5d65390-9676-4763-b41f-d7986499a90d to update the security settings on my outlook/hotmail email accounts Thunderbird no longer reliably saves/enters the passwords. The password is saved in settings as that is where I copy it from to enter manually but why is Thunderbird not doing the entry as previously. It is not every log in and not always the same account, but regularly one or the other will come up with "enter your credentials" Also occasionally the credentials screen will flash on screen and then disappear, not necessarily for the account I am using at the time but one of the others. Any help appreciated Thanks Paul