Thunderbird Support Forum

I keep getting "can't connect" message and I have to enter my password for outgoing mail. Incoming comes through no problem. How can I get Thunderbird to remember my provider password for outgoing? They obviously already have it for incoming.

when clicking an email link this is shown

"Thunderbird is already running, but is not responding. To use Thunderbird, you must first close the existing Thunderbird process, restart your device, or use a different profile."

How do I make Thunderbird instead open a new email?

This is on Fedora

Short background: Critically low on disc space. Windows pointed out a potentially extraneous 8.5gb NS3TMP Thunderbird file. Extensive Googling convinced me it would be safe to delete this file. To be safe (HA!) I first copied it to an external drive just in case things went south. They did.

After the copy, I went back and deleted the NS3TMP file. However, much to my horror, instead of deleting 8.5gb as expected, 30.5gb got deleted. After that, Thunderbird would not start claiming my profile was missing.

I copied the 8.5gb backup file back to its original place. No joy. Same message from Thunderbird.

At this point, I recreated my profile pointing Thunderbird to my Outlook email account.

I could now sign into Thunderbird and T'bird started populating the inbox and sent folders, but only partially. Worse (MUCH worse) my critical Thunderbird local folders were nowhere to be found. I attempted several folder recovery procedures to no avail.

I confess, I do not know how Thunderbird works its magic behind the scenes. Were my local folders part of the surprise 30gb file deletion and thus gone for good? Would the original emails that had been dragged into the various folders still be sitting on Outlook's servers?

As I said, totally self-inflicted but hopeful there's a road to recovery.

Any assistance or consoling words would be much appreciated.

I'm trying to read some old emails in an account from around 20 years ago that I have kept in Thunderbird the entire time. I stopped using the account, but kept it configured as it always had been with the old email saved in it. The emails are in several folders in Thunderbird, and I can see them listed when I select a folder, but the content of most of them is now invisible. For many years I upgraded Thunderbird and they remained visible, and I naively assumed that would always be the case. I think the visibility problem happened after a Thunderbird upgrade sometime within the last few years. Strangely, a few emails are readable. I think they're the last ones I viewed before I became unable to see additional ones I select to view. I believe all the data is still there, but I don't know how to read it. In the file system, here's what my Thunderbird profile Mail directory looks like:

/Users/myMacUser/Library/Thunderbird/Profiles/my-random.default/Mail account.server.name - TB Email Folder 1.sbd (empty directory) - TB Email Folder 1 (no file extension, apparently the file containing the email data. File sizes suggest they contain data) - TB Email Folder 1.msf (the index file, apparently readable) etc.

I'm using Thunderbird 115.12.2 on MacOS Sonoma 14.5. I tried several types of exports with the ImportExportTools NG extension, but it just exported zero byte or blank files for the invisible emails.

How do I read these folder data files?

When I launched Thunderbird today, it would not connect to one mailserver: imap.mailfence.com. At the same time, Thunderbird said to restart to update to 115.2.2. After updating, it still refuses to connect. There is nothing wrong with Mailfence and I do not find anything wrong with the configuration settings in Thunderbird. I even tried to set up my Mailfence email account again but it failed because it could not connect. Ideas? Thank you.

Dear

Subject to the following mail addresses: gunter.peeters@scarlet.be

We keep getting the following message when sending emails. An error occurred while sending email. The mail server replied: ip 213.49.30.104 blocked for relaying spam http://www.scarlet.be/pm/?e=f53&s=r&p=213.49.30.104. Please check if your email address is set correctly in your account settings and try again.

We are able to receive emails.

Is it possible to check this out?

Thanks in advance!

Kind regards Gunter Peeters

Translated with DeepL.com (free version)

After updating to Thunderbird version 115.12.2(32 bit) two days ago, I can no longer send emails. I get an error message "Authentification error (VM401)" I use Virgin Media. I can receive emails OK. I have not changed any server settings for a long time. I have been in touch with Virgin Media, they say the problem is with Thunderbird as I can send emails from on their one line system. I can also send emails from my Android phone. Any help would be appreciated.

I know this problem has been discussed extensively, but I can't fix it even after reading the previous posts.

I have an institutional email address that uses outlook.office365 server and mandatory two factor autentication. I had my Thunderbird setup with this, which suddenly stopped working one day on my office PC. I updated Thunderbird to the newest version, but the issue pertains. Currently I'm running Thunderbird 115.12.2. on a Windows 10 machine.

When I try to fetch my emails from this server, a popup window appears that asks for my institutional login credentials. When I enter them, a second window appears, asking for the two factor autentication. However, this window seems to be corrupt, as it does not contain any information, and and it's impossible to type in verification code, as there's no input area at all (see the first picture - note that I'm using a localized version of Thunderbird).

When I click on Privacy and cookies in the right bottom corner, then two lines appear (although without any labels), where I can type in my verification code (I guess that it is the second line, because it shows dots in place of the typed characters, as for passwords). A screenshot of this window can be seen in the second picture.

However, after typing the correct code and clicking on the grey button, the first window reappears, this time with my email address that keeps flashing forever and nothing happens. It does not even matter if I type in the right verification number or just anything, it produces the same behaviour. As a result, I can't log in to my mailbox, which is operational, because I can log in there through the web interface of outlook, and also from my laptop using Thunderbird 78.14.0. I also made sure that the server name and authentication methods are correct (outlook.office365.com, port 993, SSL/TLS, OAuth2).

Do you have any suggestion how to solve this issue?

Many thanks.

Verzenden van het bericht is mislukt. Er is een fout opgetreden bij het verzenden van e-mail. De mailserver antwoordde: Unable to relay without authentication.. Controleer of uw e-mailadres juist is ingesteld in uw accountinstellingen en probeer het opnieuw.

I occasionally get a Authentication Failed to Server (Outlook.com) and when it occurs it continues for 1-5 minutes then goes away again.

Is there any error logging proceedure that I can set up to see what the exact issue is?

I've tried running a parallel alternative email client (eM Client) and that doesn't seem to suffer in the same way, but I much prefer Thunderbird so would like to find out what the problem is.

Attachments in pdf format are covered with green color. The color disappears, for example, when I open printing setup window. I have arleady repaired the folder and fully reinstalled thunderbird. Do you have any ideas how to repair it?

Hi, i have a PEC account configured on 2 different computers, when i forward a mail, near the message appears a blue mark, but in the other computer didn't appear, so my colleague cannot tell if i forwarded the mail or not, can you help me? this problem is only with PEC accounts, with normal mail works correctly, this problem came out some months ago, before worked also whit the PEC accounts

Hi,

I have problem,

sometimes when I send an email, the program loads a completely different email and then saves it as sent,sometimes when I send an email, the program loads a completely different email and then saves it as sent. On the email provider's website, everything is correct, but unfortunately there is an error in the program. This comes up to me often.

can you help me somehow?

Regards

Patryk

I'm grateful that I've been able to use Thunderbird for free up until now. I wouldn't mind making a small donation. However, Thunderbird's email service is currently unavailable. Received emails are not displayed in the inbox. All previous history has also been erased. First of all, I would like your cooperation in fixing the current problem and restoring the system to its previous state. I will make a donation as soon as the system is restored. If the system cannot be restored without a donation, you can make a donation first. I look forward to your reply.

"Sending of password for user joebernard@verizon.net did not succeed. Mail server pop.verizon.net responded: [SYS/TEMP] Server error - Please try again later"

^^This message comes up every time I try to send an email. It can be received outside of Thunderbird and to other addresses.

I get the pop up that includes Add Security Exception

 You are about to override how Thunderbird identifies this site.

Legitimate banks, stores, and other public sites will not ask You to do this. Location:

This site attempts to identify itself with invalid Information. Unknown Identity The certificate is not trusted because it hasn’t been verified as issued by a trusted authority using a secure signature.

 Permanently store this exception

I am in Australia and Optus is my email provider. They have checked all is working at their end and suggest I contact Thunderbird which is why I am here.

Thanking you for trying to help

My e-mails fail to be delivered to my inbox immediately. They are held up somehow and then suddenly appear days later as a batch of them as though they have been held in a storage box.

When I restart Mozilla Thunderbird, my S/MIME certificate preferences under Account Settings seem to break.

When I initially select a certificate, both the common name/certificate name and the certificate fingerprint appear in the interface (see Working Settings.png). However, after restarting Thunderbird, only the common name/certificate name appears in the interface, and I cannot use S/MIME to sign messages (see Broken Settings.png). When I attempt to do so, I receive the following error message:

Send Message Error Sending of the message failed. You specified that this message should be digitally signed, but the application either failed to find the signing certificate specified in your Mail & Newsgroup Account Settings, or the certificate has expired.

To be clear, Thunderbird has no problem finding and using the certificate right after I set it—the problem only appears when I restart Thunderbird and the appearance of the certificate in the settings changes. The certificate does not expire until April 2025, so this is not the issue. The issue also occurs with another account using a different certificate that is also unexpired.

I am using Thunderbird 115.12.2 (64-bit ESR) on MacOS with Apple Silicon.