सभी प्रोडक्ट Community Forum

I have a very good PC (5800X3D, 7900XT, 32GB DDR4 3600), but Firefox (either the normal, canary and nightly version) can't play smoothly any 4K video (like the Borderlands trailer: https://www.youtube.com/watch?v=lU_NKNZljoQ ). 1440 and lower resolutions are fine, as are 4K videos on Chrome and Edge. FWIW, my CPU during 4K playback is barely used (1-2%), and my GPU's video codec (VCE) is used by around a third. Disabling HW accel makes things better, as it still stutters but it's (barely) passable. I already tried creating a new profile, but still it's the same.

when clicking an email link this is shown

"Thunderbird is already running, but is not responding. To use Thunderbird, you must first close the existing Thunderbird process, restart your device, or use a different profile."

How do I make Thunderbird instead open a new email?

This is on Fedora

The address wasn’t understood Firefox doesn’t know how to open this address, because one of the following protocols (javascript) isn’t associated with any program or is not allowed in this context. You might need to install other software to open this address.

Im getting this message on my newspaper site. It will not let me open the whole page just one article at a time but only after clicking above message

Hi, I am having some trouble with Mozilla Firefox version 127.02 on a Windows 11 PC. Certain websites do not load, for example, travel.state.org, which is a website to know the requirements to travel to the United States. However the site loads without any trouble on my Android phone, and on other browsers such as 'Microsoft Edge'. Can someone help me with this situation? Thank you this would be very much appreciated.

I'm trying to read some old emails in an account from around 20 years ago that I have kept in Thunderbird the entire time. I stopped using the account, but kept it configured as it always had been with the old email saved in it. The emails are in several folders in Thunderbird, and I can see them listed when I select a folder, but the content of most of them is now invisible. For many years I upgraded Thunderbird and they remained visible, and I naively assumed that would always be the case. I think the visibility problem happened after a Thunderbird upgrade sometime within the last few years. Strangely, a few emails are readable. I think they're the last ones I viewed before I became unable to see additional ones I select to view. I believe all the data is still there, but I don't know how to read it. In the file system, here's what my Thunderbird profile Mail directory looks like:

/Users/myMacUser/Library/Thunderbird/Profiles/my-random.default/Mail account.server.name - TB Email Folder 1.sbd (empty directory) - TB Email Folder 1 (no file extension, apparently the file containing the email data. File sizes suggest they contain data) - TB Email Folder 1.msf (the index file, apparently readable) etc.

I'm using Thunderbird 115.12.2 on MacOS Sonoma 14.5. I tried several types of exports with the ImportExportTools NG extension, but it just exported zero byte or blank files for the invisible emails.

How do I read these folder data files?

My pc auto updated today and now I am getting this message "ERROR: Platform version 127.0.02 is not compatible with min/max version 127.0.1" I CANNOT go back to older version as there is none, when using the tool from FireFox.

This there a "Global" Message Filter Rule where you can change an Apply Filter When: to ALL your Message Filters?

Example: I'd like to add "Periodically, every 10 minutes" to ALL my current Message Filters. Currently, it looks like I have to Edit each and every one of them?

Thank you in advance.

all of a sudden when I log on to hotmail dot com I get the error message too many requests when I switch browsers to edge I can log on to hotmail as normal

searched the internet but so far have not found a fix

windows 11 and firefox both up to date

Lately YouTube playing videos have been playing super fast or skipping straight to the end. I mean, they are horribly fast.

Things to know:

• I am posting here because I can't determine whether browsers may have settings unique to them that I need to change. This also happens in Chrome, but not Edge.
• I was recently forced to upgrade to Windows 11 - I can't say this issue happened exactly at that time, but fairly recently after the upgrade. I am running Windows 11 Pro.
• This does NOT happen when playing in a private browser window, either Firefox or Chrome.
• Having the Mozilla VPN on or off has no effect.
• I am sure the playback speed is set to normal. I have tried changing the playback speed to anything but normal and then back to normal and the current video runs correctly UNTIL I play the next video.
• This does not happen with Vimeo.
• It does not happen in FF for Android.

Any questions, thoughts, or advice would be appreciated.

Hi, I've noticed an inconsistency when clicking on Web-based protocol handlers in Firefox on Windows. Specifically, when I click on a mailto protocol, such as "mailto:email@example.com," it directly opens my default email application without any confirmation prompt. However, when I click on any other protocol handler, a confirmation pop-up appears, asking me to confirm which application to use. I have attached an example of what I mean.

Is there a way to configure Firefox to always show a confirmation pop-up for all protocol handlers, including mailto links? I prefer to have the option to choose the application each time rather than automatically using the default one.

I am running version 115.12.2 (64-bit). I have deleted all stored passwords using Settings -> Privacy and Security -> Show Passwords. As expected, when I try to retrieve emails a pop-up appears asking for the password - which I save. However, when I try to send an email there is no pop-up and the remote server rejects the email. How do I set a new outgoing password?

duplicate of /questions/1451035 thread.

Hello, I cannot log in to Twitter/x.com with the Firefox browser. There is a constant loop when registering. Firefox browser does not connect Twitter/X.com.

Thanks for your Help.

I keep getting the attached error msg when trying to send an email. I've changed it to "Normal Password" as advised, but it's still the same. Any help would be appreciated. Regards norman

Thunderbird 115.12.0 inline image encoding does not work and neither Thunderbird nor any other email client can decode the images. I would not be concerned if the images were instead sent as attachments -- anything would be better than the situation right now. Here is what a the sent message looks like (truncated):

This is a multi-part message in MIME format.

Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit

Hi all,

I was able to do this using custom CSS:

And the CSS:

Result can be seen at https://u3aboxhill.com.au/wp/

Regards -- Manfred

Sent from a device that prioritizes functionality over brand

Content-Type: multipart/related;

boundary="------------tIS0qvzUR0f5GnY1te0NeTQ6"

Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: 7bit

<meta http-equiv="content-type" content="text/html; charset=UTF-8">

Hi all,

I was able to do this using custom CSS:

And the CSS:

Result can be seen at https://u3aboxhill.com.au/wp/

Content-Type: image/jpeg; name="Screenshot_2024-06-28_12-30-21.jpg" Content-Disposition: inline; filename="Screenshot_2024-06-28_12-30-21.jpg" Content-Id: <part1.Mgqyv4eh.JLQ644nh@c14.au> Content-Transfer-Encoding: base64

/9j/4AAQSkZJRgABAQEBLAEsAAD/4QCuRXhpZgAASUkqAAgAAAAHABIBAwABAAAAAQAAABoB BQABAAAAYgAAABsBBQABAAAAagAAACgBAwABAAAAAgAAADEBAgANAAAAcgAAADIBAgAUAAAA gAAAAGmHBAABAAAAlAAAAAAAAAAsAQAAAQAAACwBAAABAAAAR0lNUCAyLjEwLjM0AAAyMDI0 OjA2OjI4IDEyOjM2OjE0AAEAAaADAAEAAAABAAAAAAAAAP/hDM9odHRwOi8vbnMuYWRvYmUu Y29tL3hhcC8xLjAvADw/eHBhY2tldCBiZWdpbj0i77u/IiBpZD0iVzVNME1wQ2VoaUh6cmVT ek5UY3prYzlkIj8+IDx4OnhtcG1ldGEgeG1sbnM6eD0iYWRvYmU6bnM6bWV0YS8iIHg6eG1w dGs9IlhNUCBDb3JlIDQuNC4wLUV4aXYyIj4gPHJkZjpSREYgeG1sbnM6cmRmPSJodHRwOi8v d3d3LnczLm9yZy8xOTk5LzAyLzIyLXJkZi1zeW50YXgtbnMjIj4gPHJkZjpEZXNjcmlwdGlv biByZGY6YWJvdXQ9IiIgeG1sbnM6eG1wTU09Imh0dHA6Ly9ucy5hZG9iZS5jb20veGFwLzEu MC9tbS8iIHhtbG5zOnN0RXZ0PSJodHRwOi8vbnMuYWRvYmUuY29tL3hhcC8xLjAvc1R5cGUv UmVzb3VyY2VFdmVudCMiIHhtbG5zOmRjPSJodHRwOi8vcHVybC5vcmcvZGMvZWxlbWVudHMv MS4xLyIgeG1sbnM6R0lNUD0iaHR0cDovL3d3dy5naW1wLm9yZy94bXAvIiB4bWxuczp4bXA9 Imh0dHA6Ly9ucy5hZG9iZS5jb20veGFwLzEuMC8iIHhtcE1NOkRvY3VtZW50SUQ9ImdpbXA6 ZG9jaWQ6Z2ltcDo0M2Q5N2E0MS1mNGI1LTQ3NTItYTA3Zi1lMGE5MGIwMmJiOWYiIHhtcE1N

I'm running Windows 10 Pro (64-bit). I have two different versions of Thunderbird installed on my system; one is installed in Program Files (64-bit version 125.0.0.0 dated 04/23/2024—old version) and the other is installed in Program Files (x86) (64-bit version 115.12.2.0 dated 06/25/2024—the current version). The shortcut icon on my desktop (which I never use) runs the older version located in the Program Files folder while the shortcut icon on my taskbar (and also the one in my Start menu) runs the updated version located in the Program Files (x86) folder.

As an aside, there are 21 .dll files in the Program Files (x86) folder (all starting with api-ms-win and dated 09/27/2023) while none of those files are in the Program Files folder.

FYI, I have been using Thunderbird on this PC for almost five years.

How do I fix this problem so that I have only the current version of Thunderbird run from the proper folder, Program Files?

I have a Yahoo email account and Firefox has the saved password for it. I've changed the password for my Yahoo email account recently. When Firefox prompted me if I want to update the saved password I must have chosen "NO", I don't remember. I stayed logged in the Yahoo email account for a few days after I've changed the password. I've logged out of the Yahoo account. Now I can't log back in because I don't remember the new password I've created.

I'm wondering if Firefox has the new Yahoo email account password saved somewhere in its cache.

OS: Windows 10. Firefox: 127.0.2 (64-bit).