Forum communautaire Firefox

Hello! Can you help me sort out a little problem? I am reaching out to seek assistance with a specific issue I am encountering in the Firefox browser.

In my previous browser, when opening new tabs, they were considered active even if I did not immediately switch to them. This behavior allowed me to open multiple tabs, for example, by using the mouse wheel to open several videos from the main YouTube page. Subsequently, when closing the main page, the videos would be available in the order they were opened, facilitating a seamless viewing experience.

Upon transitioning to Firefox, I have attempted to configure the browser to replicate this behavior using the Sidebery extension. However, even with the extension, new tabs are not recognized as active unless I explicitly switch to them, making it challenging to maintain the desired tab activation order.

I have explored various settings and experimented with the Sidebery extension but have not been successful in achieving the desired result. In contrast, the Yandex browser, with the "Switch to the previous active tab when closing a tab" option enabled, behaves in the manner I am accustomed to.

Could you please provide guidance on how I can configure Firefox to consider new tabs active immediately upon opening, regardless of whether I switch to them immediately?

I added pictures to make it clearer what I'm talking about.

Thank you for your time and assistance.

How do I return ctrl+c to just copying the selected text?

I have checked the extension shortcuts and not found anything there. I have also searched extensively for solutions, before making this post.

After updating my openSUSE Firefox package from version 122 to 123 every frame inside each window started to have weird grey overlay of scrollable area. I failed to find any description of such a thing happening, let alone how to get rid of it. I tried removing build-in distro-default preferences and had complete audit of all my custom preferences in about:config but none changed that behavior. I even updated to 124b4 but this also haven't changed anything. Naturally, nuking entire profile is not an option, I might as well replace the whole browser. So, how do I get rid of this thing?

Autofill has been working perfectly fine until yesterday. There's not even a manage addresses in the privacy and security settings anymore.

Autofill card still works, but not addresses.

I have a problem on YouTube where videos are too bright, but when i click for example to save that video to watch later it has normally saturated colors. And I'm using windows. On photo example1 video is too bright, but on example2 it is normal. thanks for help

How to restore cookies which have been deleted by mistake. I have accidently cleared all cookies from the cache. however, some of the important information from one of the softwares (Zerodha) was stored in the cache as cookies. Now the entire data is lost. How can it be recovered

Only in Firefox freeze the live streams in YouTube , Twitch , etc if I set 1080p60 , however if a select 720p60 then the live stream play smoothly .

please someone can help me ?

I already try to change somethings in about:config , but nothing change. same issue .

I do not want my searches to be reflected in the address bar. I believe in prior versions of Firefox there was a checkbox to delete that provision. I'm using Firefox 123.0 64-bit with Windows 10 and have been through the setting and more tools areas but found no way to remove that function. I did try the about:config suggestions but still have no joy.

When watching a video on YouTube, the sound suddenly stopped playing. Currently, sounds in video and audio are not played on all sites.

The problem is only in the browser. Audio and video files are perfectly reproduced by the VLC player. There is also sound in the Chrome and Firefox ESR browser.

My actions. 1. Disabled all extensions 2. Clearing history and deleting all cookies

My browser - Firefox Developer edition, version 123.0b9 OS - Debian 12

P.S. I have been using the developer edition for many years. It seems to me more convenient and faster compared to regular Firefox. I really don’t want to delete the customized browser.

I need help with audio in browser...

Many thanks!

Hi. Currntly I'm using 123.0b9 (64 bit) beta FF on W10 and I have this undefined problem with sound when use firefox (problem has start about two months back)- until today I couldnt find the way to make it sound correct with no rattling in the background. Situation occurs when watching any youtube videos od listining some live audio stream (probobly html5 audio in both cases). I was looking for some answers and find out that there was some simillar html5 sound rattling problem already solved some time ago- but this solution does not work for me (I have try to make some settings "false" in "about:config"). I have also try to manually disabled all the extensions and to run firefox in the "problem solving mode" - both with no luck. The solusion for me was to enable "Use hardware acceleration when available" - but I already disable it for a reason - scroll and other extra mouse functions works only when this function is disable... Now i finally have the good sound quality without scrolling or poor sound and scroll - but not both. I hope we can fix this somehow

Attempting to log-in on Twitch with Firefox Browser - Developer version 122.0b9 (64-bit) is currently not possible, repeated messages are prompted by the Twitch website about "unsupported browser" and to contact browser support to resolve this issue.

Clearing cache, disabling extensions did not work. Using regular Firefox works without issues, only noticed this being an issue after most recent update for Firefox Dev browser.

Side effect as well since update is that any Cloudflare captcha is impossible and all website that use Cloudflare to "authenticate" that I'm human just outright fail or continue indefinitely.

"Your browser is managed by your organization" suddenly appeared OS:Win11 Certificates: "ImportEnterpriseRoots" I've tried: Reinstalling Firefox Installing Firefox Developer Edition (it disapeared for few days but it was back) Deleting the registry key for it (after restart it appeared again)

 I have Avast and Malwarebytes but this has never happened to me before with this anti - virus

Hi all,

I'm wondering where sent tabs go before they arrive at the destination browser instance? Snoozes tabs go to a bookmark, but what about sent ones?

The reason I ask is because my Firefox instance, oddly, created itself a new profile one day. I don't know why, I didn't ask it to (as far as I recall), I only noticed because when I wanted to send tabs from my phone to my desktop I noticed I had a new "so-and-so's Firefox on xyz computer" appear, then on inspection I realised that my old profile has been mothballed by Firefox. When I loaded up the old profile it no longer had the browser name that I'd previously given it in Firefox Sync settings, and the tabs I'd previously sent to it did not appear. Whilst I'd like to understand why all this happened, it's not critical to my question, I just provide it as background.

So, where do these tabs go? If they never arrive at their destination then where can I find them again?

Cheers :)

Profile: https://share.firefox.dev/490blHh

Subject says it all, but it seems to occur with any site, anytime I try to open more than three or four tabs (ctrl-clicking links on a forum, for example) my Firefox instance grinds to a halt and starts consuming most of my CPU (Ryzen 5 3600).

I've tried turning off Firefox's various protections. I tried troubleshooting (formerly "safe") mode, and the problem isn't as bad but is still present as far as I can tell. The only extension I can think that would be making it worse is Tree Style Tab, but I don't know enough about interpreting Firefox profiles to verify.

The only reason I consider this odd is because doing the same thing in Chrome doesn't have this issue on this same device. If I open many tabs quickly, Chrome itself is still responsive. Those newly opened tabs may take a while to load and become interactive, but it doesn't affect the rest of the application. I pay my ISP for gigabit DSL, and as far as I can tell that is roughly what I get. In my case, Firefox doesn't behave this way.

I am running Firefox Developer Edition (123.0b1) on Windows 11 and every time I start Firefox it maximises and then resizes to a set size with the maximise button set to restore size mode (I.e. the window thinks it is maximised). I have followed the steps detailed for this question: https://support.mozilla.org/en-US/questions/1411093 however that does not resolve my issue. This has only started recently after I turned the laptop into a tablet and back again. Once I "restore" the window and then I maximise the window it works as expected. However it is very annoying. Also if I start another instance of Firefox this new instance does not exhibit the same behavior.

Computer: HP Envy OS: Windows 11 with all current updates and as far as I can tell AI is turned off using a group policy.

Hi,

  I am running the latest Firefox v122 (firefox_122.0+build1-0ubuntu0.22.04.1~mt1_amd64.deb not snap)

and when using the --profile option to specify the startup profile it fails to start even on a NEW system that never ran Firefox if I give it a directory that resides on a mounted ext3 filesystem.

  All the permissions are OK and yet running strace I see an error and after a few second will get the

generic pop-up with the error message: (after a few seconds)

Firefox is already running, but is not responding. To use Firefox, you must first close the existing Firefox process, restart your device, or use a different profile.

 Running the SAME from /tmp works fine, but I need the profile to reside on a persistent storage area

so if the LIVE distro restarts then it can restore the previous session, bookmarks, options, etc...

============================================================

 The 2 directories were created identically and have the exact same permissions:

xubuntu@xubuntu:~$ mkdir /tmp/firefox3

xubuntu@xubuntu:~$ mkdir /media/xubuntu/sys_n01_home/mozilla/firefox3

xubuntu@xubuntu:~$ ls -ald /tmp/firefox3 drwxrwxr-x 17 xubuntu xubuntu 1080 Jan 21 22:05 /tmp/firefox3

xubuntu@xubuntu:~$ ls -ald /media/xubuntu/sys_n01_home/mozilla/firefox3 drwxrwxr-x 17 xubuntu xubuntu 4096 Jan 21 21:13 /media/xubuntu/sys_n01_home/mozilla/firefox3

============================================================

The only difference is that one is mounted on tmpfs and the other is on /dev/nvme0n1p2:

xubuntu@xubuntu:~$ df -k /tmp/firefox3 Filesystem 1K-blocks Used Available Use% Mounted on tmpfs 32560016 351528 32208488 2% /tmp

xubuntu@xubuntu:~$ df -k /media/xubuntu/sys_n01_home/mozilla/firefox3 Filesystem 1K-blocks Used Available Use% Mounted on /dev/nvme0n1p2 195751828 51056068 142695768 27% /media/xubuntu/sys_n01_home

============================================================

When starting firefox with the /tmp/firefox3 profile directory it works fine and starts up:

xubuntu@xubuntu:~$ firefox --profile /tmp/firefox3

newfstatat(AT_FDCWD, "/tmp/firefox3", {st_mode=S_IFDIR|0775, st_size=1040, ...}, 0) = 0 newfstatat(AT_FDCWD, "/tmp/firefox3/.parentlock", {st_mode=S_IFREG|0664, st_size=0, ...}, 0) = 0 openat(AT_FDCWD, "/tmp/firefox3/.parentlock", O_WRONLY|O_CREAT|O_TRUNC, 0666) = 11 fcntl(11, F_GETLK, {l_type=F_UNLCK, l_whence=SEEK_SET, l_start=0, l_len=0, l_pid=-487933736}) = 0 fcntl(11, F_SETLK, {l_type=F_WRLCK, l_whence=SEEK_SET, l_start=0, l_len=0}) = 0 uname({sysname="Linux", nodename="xubuntu", ...}) = 0

BUT when using the persistent storage on the real filesystem (but SAME exact permissions) it fails:

newfstatat(AT_FDCWD, "/media/xubuntu/sys_n01_home/mozilla/firefox3", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/media/xubuntu/sys_n01_home/mozilla/firefox3/.parentlock", {st_mode=S_IFREG|0664, st_size=0, ...}, 0) = 0 openat(AT_FDCWD, "/media/xubuntu/sys_n01_home/mozilla/firefox3/.parentlock", O_WRONLY|O_CREAT|O_TRUNC, 0666) = 11 fcntl(11, F_GETLK, {l_type=F_UNLCK, l_whence=SEEK_SET, l_start=0, l_len=0, l_pid=1519466008}) = 0 fcntl(11, F_SETLK, {l_type=F_WRLCK, l_whence=SEEK_SET, l_start=0, l_len=0}) = -1 EACCES (Permission denied) close(11) = 0

Am I doing anything wrong or is this some weird startup issue / race condition in the parentlock management?

Thank you for looking into this.

  -Sanjiyan

PS: I can upload the full strace file for both scenarios if needed. Thanks again.

     running on an xubuntu distribution "22.04.2 LTS (Jammy Jellyfish)"