Thunderbird Support Forum

After Thunderbird update 115.12.2(20240621154414) was installed on my PC on the 25/6/2024 I am unable to receive emails. I continue to get an error message on account noeljc@optusnet.com.au (IMAP)

   Connection to server mail.optusnet.com.au timed out.

or Failed to connect to server mail.optusnet.com.au. I have looked thru all the forums and tried various solutions without success including extending the setting for mailnews.tcptimeout to 3000. I have checked and validated my account server settings are as recommended by my ISP(Optus) are correct for authenticated emails. I even turned off my Norton VPN completely to no avail even though I use Split tunnelling to allow Thunderbird thru it as an exclusion. It appears to me there maybe a bug in the last Thunderbird update causing this. I have had this issue in the past at various times intermittently but it has always seemed to correct itself. I have been in contact with my ISP(Optus) regarding this error and all they could say was to logon to email server via webmail and did not offer any other solution. It appears there is a communication breakdown between my PC and the Email server somewhere. As I stated this only happened after the last Thunderbird update on my PC on 25/6 as it was working up until 24/6. I also have another optus email account for my wife on Thunderbird which has the same error messages. Could the Mozilla gurus please advise what to do.

First I got problem.with my laptop. I went to a service shop, but the technician caused me to loose the old files of my e mails. I seriously need help to get my old e mails accessible

Good morning. I have been unable to receive e-mails since 30/05/2024. Has the fact that I received an e-mail message from "Mail@voice" <mboudreaux@firmgroupagency.com> on 31/05/2024, got to do with the problem. I would be grateful could help solve the problem. Thank you. Emyr Davies.

My outgoing email stopped working suddenly. Incoming email works fine. I sent an email with a large attachment. It sent but after that I could not send anymore emails. I checked my password and server settings nothing has changed except I can't send email. I get a pop up window that asks for my password but after entering my password and hit enter I get another pop up window that says login failed please enter new password. The password works fine when I go AOL mail and enter it.

It has stopped working. Starting 2 weeks ago, Thunderbird keeps saying "Login to server imap.aol.com with username stuart_jones@verizon.net failed." I don't know what to do.

My Local Inbox suddenly started to arrange itself by group according to correspondent. I can't get the emails back into chronological order. I can't work with a mail program that doesn't give me my messages in chronological order, with most recent at the bottom. If I did something to cause this change, please tell me how to undo it. I have about eight email addresses, and they all feed mail into the Local Inbox.

On the top of the left side of the incoming email page, next to my email address, I would like the following alternatives to appear: answer, answer all, forward . . . I have had them before, have never had a problem with them, but I must have pressed the wrong key as now I get the following instead: an icon with a pin-up button, a phrase about filtering, and then five icons with an envelope, a star, a notebook . . . What do I need to do to recover the original layout?

This new version of Thunderbird (115.12.2) is not the best. The Composition toolbar doesn't exist when typing a new message and I no longer have a menu bar when typing a new message.

Another issue is on replying why do these sideways "V's" show at the beginning of each line of the senders email when replying. Sometimes it will be just a black line all the way down. When I saw those I felt like I had woken up in 1995.

I am using Windows 11 Pro.

Thank you

Hello --

Not sure when this happened.

Got 2 email accounts, account X and account Y. All was working fine until today, 6/27/24. Both have different outgoing SMTP servers.

Now I am trying to send, it is asking for passwords, which I have and is 100% correct. In fact, if I put in wrong password it tells me, so I know it is communicating. When I put in the correct password, I get a timeout on BOTH SMTP servers.

I disabled Norton Firewall.

Works fine from another PC app (poppeeper) and from my android (k9 mail). Both accounts are IMAP.

Neither SSL/TLS or STARTTLS makes a difference. Nor did a re-boot.

TB 115.12.2 (64 Bit) on Windows 10

Sending of the message failed. The message could not be sent because the connection to Outgoing server (SMTP) mailroom4.hostrocket.com timed out. Try again.

Description: hostrocket Server Name: mailroom4.hostrocket.com Port: 465 User Name: ernie@e(redacted).com Authentication method: Normal password Connection Security: SSL/TLS

Anything change?

I keep getting "can't connect" message and I have to enter my password for outgoing mail. Incoming comes through no problem. How can I get Thunderbird to remember my provider password for outgoing? They obviously already have it for incoming.

when clicking an email link this is shown

"Thunderbird is already running, but is not responding. To use Thunderbird, you must first close the existing Thunderbird process, restart your device, or use a different profile."

How do I make Thunderbird instead open a new email?

This is on Fedora

Short background: Critically low on disc space. Windows pointed out a potentially extraneous 8.5gb NS3TMP Thunderbird file. Extensive Googling convinced me it would be safe to delete this file. To be safe (HA!) I first copied it to an external drive just in case things went south. They did.

After the copy, I went back and deleted the NS3TMP file. However, much to my horror, instead of deleting 8.5gb as expected, 30.5gb got deleted. After that, Thunderbird would not start claiming my profile was missing.

I copied the 8.5gb backup file back to its original place. No joy. Same message from Thunderbird.

At this point, I recreated my profile pointing Thunderbird to my Outlook email account.

I could now sign into Thunderbird and T'bird started populating the inbox and sent folders, but only partially. Worse (MUCH worse) my critical Thunderbird local folders were nowhere to be found. I attempted several folder recovery procedures to no avail.

I confess, I do not know how Thunderbird works its magic behind the scenes. Were my local folders part of the surprise 30gb file deletion and thus gone for good? Would the original emails that had been dragged into the various folders still be sitting on Outlook's servers?

As I said, totally self-inflicted but hopeful there's a road to recovery.

Any assistance or consoling words would be much appreciated.

I'm trying to read some old emails in an account from around 20 years ago that I have kept in Thunderbird the entire time. I stopped using the account, but kept it configured as it always had been with the old email saved in it. The emails are in several folders in Thunderbird, and I can see them listed when I select a folder, but the content of most of them is now invisible. For many years I upgraded Thunderbird and they remained visible, and I naively assumed that would always be the case. I think the visibility problem happened after a Thunderbird upgrade sometime within the last few years. Strangely, a few emails are readable. I think they're the last ones I viewed before I became unable to see additional ones I select to view. I believe all the data is still there, but I don't know how to read it. In the file system, here's what my Thunderbird profile Mail directory looks like:

/Users/myMacUser/Library/Thunderbird/Profiles/my-random.default/Mail account.server.name - TB Email Folder 1.sbd (empty directory) - TB Email Folder 1 (no file extension, apparently the file containing the email data. File sizes suggest they contain data) - TB Email Folder 1.msf (the index file, apparently readable) etc.

I'm using Thunderbird 115.12.2 on MacOS Sonoma 14.5. I tried several types of exports with the ImportExportTools NG extension, but it just exported zero byte or blank files for the invisible emails.

How do I read these folder data files?

When I launched Thunderbird today, it would not connect to one mailserver: imap.mailfence.com. At the same time, Thunderbird said to restart to update to 115.2.2. After updating, it still refuses to connect. There is nothing wrong with Mailfence and I do not find anything wrong with the configuration settings in Thunderbird. I even tried to set up my Mailfence email account again but it failed because it could not connect. Ideas? Thank you.

Dear

Subject to the following mail addresses: gunter.peeters@scarlet.be

We keep getting the following message when sending emails. An error occurred while sending email. The mail server replied: ip 213.49.30.104 blocked for relaying spam http://www.scarlet.be/pm/?e=f53&s=r&p=213.49.30.104. Please check if your email address is set correctly in your account settings and try again.

We are able to receive emails.

Is it possible to check this out?

Thanks in advance!

Kind regards Gunter Peeters

Translated with DeepL.com (free version)

After updating to Thunderbird version 115.12.2(32 bit) two days ago, I can no longer send emails. I get an error message "Authentification error (VM401)" I use Virgin Media. I can receive emails OK. I have not changed any server settings for a long time. I have been in touch with Virgin Media, they say the problem is with Thunderbird as I can send emails from on their one line system. I can also send emails from my Android phone. Any help would be appreciated.

I know this problem has been discussed extensively, but I can't fix it even after reading the previous posts.

I have an institutional email address that uses outlook.office365 server and mandatory two factor autentication. I had my Thunderbird setup with this, which suddenly stopped working one day on my office PC. I updated Thunderbird to the newest version, but the issue pertains. Currently I'm running Thunderbird 115.12.2. on a Windows 10 machine.

When I try to fetch my emails from this server, a popup window appears that asks for my institutional login credentials. When I enter them, a second window appears, asking for the two factor autentication. However, this window seems to be corrupt, as it does not contain any information, and and it's impossible to type in verification code, as there's no input area at all (see the first picture - note that I'm using a localized version of Thunderbird).

When I click on Privacy and cookies in the right bottom corner, then two lines appear (although without any labels), where I can type in my verification code (I guess that it is the second line, because it shows dots in place of the typed characters, as for passwords). A screenshot of this window can be seen in the second picture.

However, after typing the correct code and clicking on the grey button, the first window reappears, this time with my email address that keeps flashing forever and nothing happens. It does not even matter if I type in the right verification number or just anything, it produces the same behaviour. As a result, I can't log in to my mailbox, which is operational, because I can log in there through the web interface of outlook, and also from my laptop using Thunderbird 78.14.0. I also made sure that the server name and authentication methods are correct (outlook.office365.com, port 993, SSL/TLS, OAuth2).

Do you have any suggestion how to solve this issue?

Many thanks.