Thunderbird Community Forum

When I try to send my emails I keep getting this error message Service unavailable; Client host [208.115.247.217] blocked using clients.rbl.e-scout.net; host 208.115.247.217 blocked due to abusive behavior from your network. Please contact servers@ispn.net for resolution..

I have 10 email accounts in my Thunderbird 115.12.2 (64-bit) and I am using Microsoft Windows 10 Pro and all my sent, draft, archives and templates are going into a different folder. I want them to go into the folder from which the email was sent but they are all going into the email tinakeeling@att.net.

I have changed it to reflect the correct folder but then a few days later and every time I restart Thunderbird the program changes the folders back to tinakeeling@att.net

I have even unchecked the box "place a copy in" and when Thunderbird is restarted it reverts back.

What can I do to fix this issue?

See attached picture of what I am talking about

My isp is virgin media and I use Mozilla for browsing and emails. I have been with them for many years but recently I found that although I am receiving emails I can't send them . I get this message.

Sending of the message failed. An error occurred while sending mail. The mail server responded: Authentication Required (VM401). Please verify that your email address is correct in your account settings and try again.

Depuis la mise en place de cette nouvelle version le 9 aout 2024, je ne peux plus visualiser les pièces jointes d'un message, attachées en .pdf Je suis sur Windows 10 A vous lire,

and I immediately began scrambling to get it back. I found this somewhere: "Don't Delete Files" is the preferred option because it saves the old profile's folder and allows you to recover the files to a new profile. So that gave me hope because that's what I had clicked (unfortunately, it was right before I saw the cancel button over on the right). That's what I get for being in a hurry I guess.

Anyhow, after 4 days of reading support forums and tons of trial and error, I'm no closer to restoring that profile than when I first started (although I've learned a lot about what does NOT work).

Btw, both my profiles have always been set up as POP3 at Gmail, although if I ever get this current problem sorted out I'll be shopping for a different POP3 provider. But that's another story.

I know how to create a new profile with Profile Manager. And I found the Profiles folders under both Thunderbird folder as well as ThunderbirdOLD folder. Have I been on the right track so far?

In the Thunderbird/Profiles folder, I don't see a folder with the deleted profile name (except the new ones (duds) I've since created ). On the other hand, I don't see the name of the profile that I did NOT delete either, but somehow it seems to be working just fine. Maybe it's the ".default" folder or ".default-release" folder? I've only ever had two profiles and I may have created the non-deleted profile first, so did that one end up being named .default? -shrug- I have no clue.

Anyhow, in the ThunderbirdOLD/Profiles folder, I also see ".default" as well as ".default-release" folders too. But in addition, I'm seeing a ".deletedprofile" named folder. So that's where I originally thought my several dozen email folders with several thousand emails and Address Book etc are hiding. But I've copied all the above mentioned folders into the several new Profiles I've created, on a trial and error basis but so far..... no luck. All I get when I open one is the new set up screen to set up a new pop3 account.... which I can do, but that's just starting from scratch without any of my saved data. I'm running out of ideas.

Where am I going wrong?

If my email provider's server was originally POP but my provider's moving to IMAP there's a good chance they'll temporarily support both versions.

And I've discovered that I can set up a 2nd email account in Thunderbird and link it to their IMAP server. Both email accounts will then download the same emails.

But of course my POP account (locally) will have a whole history of emails whereas the new IMAP account won't.

So rather can creating that 2nd email account, is it possible to set up (i.e. convert) the existing account so that it'll access the IMAP server, rather than the old POP one? I tried opening its Server Settings in Thunderbird and simply changing the Server Name and Port but that doesn't work. The Server Type remains as POP and even the Advanced settings don't offer any clue :-(

I installed the latest Thunderbird program and installed successfully on Windows 10 PC. The Inbox emails imported okay but the sent emails, draft and all other folders are not importing from Gmail. Help please !

I am with Telstra ( Australia ) Bigpond internet with saved passwords which following recent ( Thunderbird) update Thunderbird cannot connect to the server. I have not changed any settings or passwords prior to this error see attached for error I am also a donor to Thunderbird.

A week ago my whole computer went kaput. I pay for cloud back-up so everything except Thunderbird was fully restored. I know noting about computers. My friend, an IT pro who built and sold me this machine, has worked hard without success. This is my home desktop machine running Windows 10. I can access incoming mail through AT&T Yahoo Mail. And today some kind AT&T person spent two hours with me on the phone. Now I have a newly assigned security code and, to my surprise, a functioning Thunderbird. However, my hundreds of addresses have not reappeared nor have the thousands of saved emails in my various local folders. I believe what I have now is a newer version of Thunderbird. Much of it looks different. And weirdly there was a button for "old email" that I hit and started to receive things sent to me as far back as 2007. I think it stopped at some capacity limit. I am sure most of what came through I don't want but I certainly don't want to permanently delete things I may have moved to another folder. The AT&T person got me to some repair page with step-by-step instructions for hooking up with Thunderbird but he got stymied at some point. I am at a loss here and would appreciate help. Thank you for your time and attention.

Hi, I'd like to create a filter that uses a list of names or addresses to send emails to folders. So instead of "if sender contains" Political candidate #1 OR Political candidate #2 and on and on I'd like to be able to use a list of some format that contains the same information.

Is that possible?

Otto

I would like to export all of the email addresses in a collection of email folders. Some text format would be nice, csv or, even better, tab delimited to pull into a database to summarize.

I'm running on an M1 Mac, Thunderbird version 128.1.0esr.

Is there some utility that can help? Or some way to Applescript it?

Thank you,

Gary

Thunderbird used to have a panel on the left-hand side of the screen which listed folders such as bin, sent, etc etc. This has disappeared and I do not know how to access folders such as bin, sent, trash, important etc.

Hello, we are running Thunderbird 128.1.0osr (32-bit) released on 8/6/24. Ever since the upgrade my husband's email has not worked correctly.

Around that same time, he received a pop up within the Thunderbird app asking for donations from Thunderbird. The popup would not go away and my husband lost a ton of his email.

Ever since these two events his Thunderbird email won't work correctly.

Messages since 8/4/24 at 6:32 am DO work correctly. Emails prior to 5/6/23 also work correctly. Any message in the time period from 5/6/23 at 11:26 am to 8/4/24 does NOT work correctly.

We are having the same trouble with the sent items folder.

We use a third party email that we import into Thunderbird and have used the third party email and Thunderbird since at least 2020 and never had this problem.

We can see all the message headers in our email list, but when we click on the email, nothing shows up. It will briefly say "message loading" at the bottom corner, but the email is totally blank. Furthermore, the message that peeks out at the bottom is the last email that we clicked on from the section of emails that does work. It is not changing to the email we are actually clicking on.

For example: lets say we have an email with message header "thank you for your order" received on 8/15. We click into that and it pulls up fine.

Then we go into older email from 7/31. The message header is "hurry sale ends today". If we click on that, it will say "message loading" at the bottom corner. However, the message preview at the bottom of the screen still displays the from/to/subject from the previous email we viewed from 8/15 "thank you for your order" (the message from 8/15 shows as blank though).

Even if we double click the message from 7/31 that we are trying to view, it just pulls up a blank screen. The bar at the top will briefly display the correct message title that we are trying to open, then it just blanks out.

Steps we have taken:

1. In Account Settings/Privacy I clicked to "allow remote content". This made an improvement as prior to this we were having the same problem even with recent messages. We could see one or two messages that had just arrived, then the third message we couldn't see. We have messages set to delete on the server after so many days. So I think it was able to recover the message that were still on the remove 3rd party server.

2. We moved a lot of the emails into archive folders as I thought the inbox may be too large. That didn't make any improvement.

Thanks for any help you can provide. My husband has a lot of really important information in his emails that he needs.

I received an email from Microsoft saying I could lose emails on my hotmail account if I don't upgrade any third party mail applications to a version which uses "modern authentication methods now needed to continue syncing Outlook Email in non-Microsoft email apps". I'm not tech savvy but do I assume this means I need to upgrade my Thunderbird account to satisfy their concerns and, if so, how do I do this? Thank you Geoff Smith

I recently bought new Dell Inspiron and loaded Thunderbird as I have used elsewhere for very many years The folders are threaded which is usless for the way I work and I want to permanently disable this preferably in one action as I have many folders

Advice how to do this would be appreciated

Many thanks John Puncher